[ruby-core:120749] [Ruby master Feature#21084] Declare objects have weak references
Issue #21084 has been reported by peterzhu2118 (Peter Zhu). ---------------------------------------- Feature #21084: Declare objects have weak references https://bugs.ruby-lang.org/issues/21084 * Author: peterzhu2118 (Peter Zhu) * Status: Open ---------------------------------------- # Summary The current way of marking weak references uses `rb_gc_mark_weak(VALUE *ptr)`. This presents challenges because Ruby's GC is incremental, meaning that if the `ptr` changes (e.g. realloc'd or free'd), then we could have an invalid memory access. This also overwrites `*ptr = Qundef` if `*ptr` is dead, which prevents any cleanup to be run (e.g. freeing memory or deleting entries from hash tables). This ticket proposes `rb_gc_declare_weak_references` which declares that an object has weak references and calls a cleanup function after marking, allowing the object to clean up any memory for dead objects. # Introduction In [[Feature #19783]](https://bugs.ruby-lang.org/issues/19783), I introduced an API allowing objects to mark weak references, the function signature looks like this: ```c void rb_gc_mark_weak(VALUE *ptr); ``` `rb_gc_mark_weak` is called during the marking phase of the GC to specify that the memory at `ptr` holds a pointer to a Ruby object that is weakly referenced. `rb_gc_mark_weak` appends this pointer to a list that is processed after the marking phase of the GC. If the object at `*ptr` is no longer alive, then it overwrites the object reference with a special value (`*ptr = Qundef`). However, this API resulted in two challenges: 1. Ruby's default GC is incremental, which means that the GC is not ran in one phase, but rather split into chunks of work that interleaves with Ruby execution. The `ptr` passed into `rb_gc_mark_weak` could be on the malloc heap, and that memory could be realloc'd or even free'd. We had to use workarounds such as `rb_gc_remove_weak` to ensure that there were no illegal memory accesses. This made `rb_gc_mark_weak` difficult to use, impacted runtime performance, and increased memory usage. 2. When an object dies, `rb_gc_mark_weak` only overwites the reference with `Qundef`. This means that if we want to do any cleanup (e.g. free a piece of memory or delete a hash table entry), we could not do that and had to defer this process elsewhere (e.g. during marking or runtime). # Declarative weak references In this ticket, I'm proposing a new API for weak references. Instead of an object marking its weak references during the marking phase, the object declares that it has weak references using the `rb_gc_declare_weak_references` function. This declaration occurs during runtime (e.g. after the object has been created) rather than during GC. After an object declares that it has weak references, it will have its callback function called after marking as long as that object is alive. This callback function can then call a special function `rb_gc_handle_weak_references_alive_p` to determine whether its references are alive. This will allow the callback function to do whatever it wants on the object, allowing it to perform any cleanup work it needs. This significantly simplifies the code for `ObjectSpace::WeakMap` and `ObjectSpace::WeakKeyMap` because it no longer needs to have the workarounds for the limitations of `rb_gc_mark_weak`. # Performance The performance results below demonstrate that `ObjectSpace::WeakMap#[]=` is now about 60% faster because the implementation has been simplified and the number of allocations has been reduced. We can see that there is not a significant impact on the performance of `ObjectSpace::WeakMap#[]`. Base: ``` ObjectSpace::WeakMap#[]= 4.620M (± 6.4%) i/s (216.44 ns/i) - 23.342M in 5.072149s ObjectSpace::WeakMap#[] 30.967M (± 1.9%) i/s (32.29 ns/i) - 154.998M in 5.007157s ``` Branch: ``` ObjectSpace::WeakMap#[]= 7.336M (± 2.8%) i/s (136.31 ns/i) - 36.755M in 5.013983s ObjectSpace::WeakMap#[] 30.902M (± 5.4%) i/s (32.36 ns/i) - 155.901M in 5.064060s ``` Code: ``` require "bundler/inline" gemfile do source "https://rubygems.org" gem "benchmark-ips" end wmap = ObjectSpace::WeakMap.new key = Object.new val = Object.new wmap[key] = val Benchmark.ips do |x| x.report("ObjectSpace::WeakMap#[]=") do |times| i = 0 while i < times wmap[Object.new] = Object.new i += 1 end end x.report("ObjectSpace::WeakMap#[]") do |times| i = 0 while i < times wmap[key] wmap[val] # does not exist i += 1 end end end ``` # Alternative designs Currently, `rb_gc_declare_weak_references` is designed to be an internal-only API. This allows us to assume the object types that call `rb_gc_declare_weak_references`. In the future, if we want to open up this API to third parties, we may want to change this function to something like: ```c void rb_gc_add_cleaner(VALUE obj, void (*callback)(VALUE obj)); ``` This will allow the third party to implement a custom `callback` that gets called after the marking phase of GC to clean up any dead references. I chose not to implement this design because it is less efficient as we would need to store a mapping from `obj` to `callback`, which requires extra memory. -- https://bugs.ruby-lang.org/
Issue #21084 has been updated by Eregon (Benoit Daloze). Is there a PR already? I don't see the link in the description. ---------------------------------------- Feature #21084: Declare objects have weak references https://bugs.ruby-lang.org/issues/21084#change-111771 * Author: peterzhu2118 (Peter Zhu) * Status: Open ---------------------------------------- # Summary The current way of marking weak references uses `rb_gc_mark_weak(VALUE *ptr)`. This presents challenges because Ruby's GC is incremental, meaning that if the `ptr` changes (e.g. realloc'd or free'd), then we could have an invalid memory access. This also overwrites `*ptr = Qundef` if `*ptr` is dead, which prevents any cleanup to be run (e.g. freeing memory or deleting entries from hash tables). This ticket proposes `rb_gc_declare_weak_references` which declares that an object has weak references and calls a cleanup function after marking, allowing the object to clean up any memory for dead objects. # Introduction In [[Feature #19783]](https://bugs.ruby-lang.org/issues/19783), I introduced an API allowing objects to mark weak references, the function signature looks like this: ```c void rb_gc_mark_weak(VALUE *ptr); ``` `rb_gc_mark_weak` is called during the marking phase of the GC to specify that the memory at `ptr` holds a pointer to a Ruby object that is weakly referenced. `rb_gc_mark_weak` appends this pointer to a list that is processed after the marking phase of the GC. If the object at `*ptr` is no longer alive, then it overwrites the object reference with a special value (`*ptr = Qundef`). However, this API resulted in two challenges: 1. Ruby's default GC is incremental, which means that the GC is not ran in one phase, but rather split into chunks of work that interleaves with Ruby execution. The `ptr` passed into `rb_gc_mark_weak` could be on the malloc heap, and that memory could be realloc'd or even free'd. We had to use workarounds such as `rb_gc_remove_weak` to ensure that there were no illegal memory accesses. This made `rb_gc_mark_weak` difficult to use, impacted runtime performance, and increased memory usage. 2. When an object dies, `rb_gc_mark_weak` only overwites the reference with `Qundef`. This means that if we want to do any cleanup (e.g. free a piece of memory or delete a hash table entry), we could not do that and had to defer this process elsewhere (e.g. during marking or runtime). # Declarative weak references In this ticket, I'm proposing a new API for weak references. Instead of an object marking its weak references during the marking phase, the object declares that it has weak references using the `rb_gc_declare_weak_references` function. This declaration occurs during runtime (e.g. after the object has been created) rather than during GC. After an object declares that it has weak references, it will have its callback function called after marking as long as that object is alive. This callback function can then call a special function `rb_gc_handle_weak_references_alive_p` to determine whether its references are alive. This will allow the callback function to do whatever it wants on the object, allowing it to perform any cleanup work it needs. This significantly simplifies the code for `ObjectSpace::WeakMap` and `ObjectSpace::WeakKeyMap` because it no longer needs to have the workarounds for the limitations of `rb_gc_mark_weak`. # Performance The performance results below demonstrate that `ObjectSpace::WeakMap#[]=` is now about 60% faster because the implementation has been simplified and the number of allocations has been reduced. We can see that there is not a significant impact on the performance of `ObjectSpace::WeakMap#[]`. Base: ``` ObjectSpace::WeakMap#[]= 4.620M (± 6.4%) i/s (216.44 ns/i) - 23.342M in 5.072149s ObjectSpace::WeakMap#[] 30.967M (± 1.9%) i/s (32.29 ns/i) - 154.998M in 5.007157s ``` Branch: ``` ObjectSpace::WeakMap#[]= 7.336M (± 2.8%) i/s (136.31 ns/i) - 36.755M in 5.013983s ObjectSpace::WeakMap#[] 30.902M (± 5.4%) i/s (32.36 ns/i) - 155.901M in 5.064060s ``` Code: ``` require "bundler/inline" gemfile do source "https://rubygems.org" gem "benchmark-ips" end wmap = ObjectSpace::WeakMap.new key = Object.new val = Object.new wmap[key] = val Benchmark.ips do |x| x.report("ObjectSpace::WeakMap#[]=") do |times| i = 0 while i < times wmap[Object.new] = Object.new i += 1 end end x.report("ObjectSpace::WeakMap#[]") do |times| i = 0 while i < times wmap[key] wmap[val] # does not exist i += 1 end end end ``` # Alternative designs Currently, `rb_gc_declare_weak_references` is designed to be an internal-only API. This allows us to assume the object types that call `rb_gc_declare_weak_references`. In the future, if we want to open up this API to third parties, we may want to change this function to something like: ```c void rb_gc_add_cleaner(VALUE obj, void (*callback)(VALUE obj)); ``` This will allow the third party to implement a custom `callback` that gets called after the marking phase of GC to clean up any dead references. I chose not to implement this design because it is less efficient as we would need to store a mapping from `obj` to `callback`, which requires extra memory. -- https://bugs.ruby-lang.org/
Issue #21084 has been updated by peterzhu2118 (Peter Zhu). Ah yes, I forgot to link the PR: https://github.com/ruby/ruby/pull/12606 ---------------------------------------- Feature #21084: Declare objects have weak references https://bugs.ruby-lang.org/issues/21084#change-111773 * Author: peterzhu2118 (Peter Zhu) * Status: Open ---------------------------------------- # Summary The current way of marking weak references uses `rb_gc_mark_weak(VALUE *ptr)`. This presents challenges because Ruby's GC is incremental, meaning that if the `ptr` changes (e.g. realloc'd or free'd), then we could have an invalid memory access. This also overwrites `*ptr = Qundef` if `*ptr` is dead, which prevents any cleanup to be run (e.g. freeing memory or deleting entries from hash tables). This ticket proposes `rb_gc_declare_weak_references` which declares that an object has weak references and calls a cleanup function after marking, allowing the object to clean up any memory for dead objects. # Introduction In [[Feature #19783]](https://bugs.ruby-lang.org/issues/19783), I introduced an API allowing objects to mark weak references, the function signature looks like this: ```c void rb_gc_mark_weak(VALUE *ptr); ``` `rb_gc_mark_weak` is called during the marking phase of the GC to specify that the memory at `ptr` holds a pointer to a Ruby object that is weakly referenced. `rb_gc_mark_weak` appends this pointer to a list that is processed after the marking phase of the GC. If the object at `*ptr` is no longer alive, then it overwrites the object reference with a special value (`*ptr = Qundef`). However, this API resulted in two challenges: 1. Ruby's default GC is incremental, which means that the GC is not ran in one phase, but rather split into chunks of work that interleaves with Ruby execution. The `ptr` passed into `rb_gc_mark_weak` could be on the malloc heap, and that memory could be realloc'd or even free'd. We had to use workarounds such as `rb_gc_remove_weak` to ensure that there were no illegal memory accesses. This made `rb_gc_mark_weak` difficult to use, impacted runtime performance, and increased memory usage. 2. When an object dies, `rb_gc_mark_weak` only overwites the reference with `Qundef`. This means that if we want to do any cleanup (e.g. free a piece of memory or delete a hash table entry), we could not do that and had to defer this process elsewhere (e.g. during marking or runtime). # Declarative weak references In this ticket, I'm proposing a new API for weak references. Instead of an object marking its weak references during the marking phase, the object declares that it has weak references using the `rb_gc_declare_weak_references` function. This declaration occurs during runtime (e.g. after the object has been created) rather than during GC. After an object declares that it has weak references, it will have its callback function called after marking as long as that object is alive. This callback function can then call a special function `rb_gc_handle_weak_references_alive_p` to determine whether its references are alive. This will allow the callback function to do whatever it wants on the object, allowing it to perform any cleanup work it needs. This significantly simplifies the code for `ObjectSpace::WeakMap` and `ObjectSpace::WeakKeyMap` because it no longer needs to have the workarounds for the limitations of `rb_gc_mark_weak`. # Performance The performance results below demonstrate that `ObjectSpace::WeakMap#[]=` is now about 60% faster because the implementation has been simplified and the number of allocations has been reduced. We can see that there is not a significant impact on the performance of `ObjectSpace::WeakMap#[]`. Base: ``` ObjectSpace::WeakMap#[]= 4.620M (± 6.4%) i/s (216.44 ns/i) - 23.342M in 5.072149s ObjectSpace::WeakMap#[] 30.967M (± 1.9%) i/s (32.29 ns/i) - 154.998M in 5.007157s ``` Branch: ``` ObjectSpace::WeakMap#[]= 7.336M (± 2.8%) i/s (136.31 ns/i) - 36.755M in 5.013983s ObjectSpace::WeakMap#[] 30.902M (± 5.4%) i/s (32.36 ns/i) - 155.901M in 5.064060s ``` Code: ``` require "bundler/inline" gemfile do source "https://rubygems.org" gem "benchmark-ips" end wmap = ObjectSpace::WeakMap.new key = Object.new val = Object.new wmap[key] = val Benchmark.ips do |x| x.report("ObjectSpace::WeakMap#[]=") do |times| i = 0 while i < times wmap[Object.new] = Object.new i += 1 end end x.report("ObjectSpace::WeakMap#[]") do |times| i = 0 while i < times wmap[key] wmap[val] # does not exist i += 1 end end end ``` # Alternative designs Currently, `rb_gc_declare_weak_references` is designed to be an internal-only API. This allows us to assume the object types that call `rb_gc_declare_weak_references`. In the future, if we want to open up this API to third parties, we may want to change this function to something like: ```c void rb_gc_add_cleaner(VALUE obj, void (*callback)(VALUE obj)); ``` This will allow the third party to implement a custom `callback` that gets called after the marking phase of GC to clean up any dead references. I chose not to implement this design because it is less efficient as we would need to store a mapping from `obj` to `callback`, which requires extra memory. -- https://bugs.ruby-lang.org/
participants (2)
-
Eregon (Benoit Daloze) -
peterzhu2118 (Peter Zhu)