[ruby-core:112773] [Ruby master Feature#19521] Support for `Module#name=` and `Class#name=`.
Issue #19521 has been reported by ioquatix (Samuel Williams). ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. This proposal introduces `Class#name=` to set the temporary class name. This is an alternative or addition to <https://bugs.ruby-lang.org/issues/19520>. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Eregon (Benoit Daloze). At least it should be forbidden to change the name of a Module multiple times. So from that POV that, #19520 is better. Also the name of a Module get cached into other modules "namespaced" under that first Module. So it seems highly problematic to allow changing the name of a Module. In general I'm against this functionality as explained in https://bugs.ruby-lang.org/issues/19450#note-14. It can lead to confusion and lies about the program state, e.g., pretend there is `Foo::Bar` when there isn't, even when `remove_const`/`const_set` are not used. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-102292 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams).
At least it should be forbidden to change the name of a Module multiple times. So from that POV that, #19520 is better.
We can make assignment fail if the name is not `nil`.
Also the name of a Module get cached into other modules "namespaced" under that first Module. So it seems highly problematic to allow changing the name of a Module.
Yes, that's correct, the temporary name gets cached into nested modules, ```ruby c = Class.new c.class_eval("class Nested; end") c::Nested => #<Class:0x00007f7f11ae6aa0>::Nested c.class_eval("class Nested2; end") c::Nested => #<Class:0x00007f7f11ae6aa0>::Nested c::Nested2 => fake::Nested2 ``` I agree, #19520 is better in this regard.
It can lead to confusion and lies about the program state, e.g., pretend there is Foo::Bar when there isn't, even when remove_const/const_set are not used.
As discussed, this is already the case, and can be easily replicated: ```ruby Foo = foo = Class.new => Foo Foo.class_eval("class Bar; end") Foo::Bar => Foo::Bar Object.send(:remove_const, "Foo") => Foo Foo = b = Class.new => Foo Foo::Bar.name => "Foo::Bar" Foo::Bar uninitialized constant Foo::Bar (NameError) ``` I agree that the proposal makes it easier to fake class names, but that functionality is already possible and thus I don't see that as an issue being introduced by this proposal. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-102301 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Eregon (Benoit Daloze). ioquatix (Samuel Williams) wrote in #note-8:
It can lead to confusion and lies about the program state, e.g., pretend there is Foo::Bar when there isn't, even when remove_const/const_set are not used.
As discussed, this is already the case, and can be easily replicated:
I just said: "even when remove_const/const_set are not used". So sure it's possible with `remove_const` with a made-up example. Is it done in practice? I don't think so.
I agree that the proposal makes it easier to fake class names, but that functionality is already possible and thus I don't see that as an issue being introduced by this proposal.
It makes it extremely easy to have fake names, in fact I would expect with this feature many people would do the mistake to use a constant-like name and so break the symmetry between module names and constant paths. In the current situation, it's extremely rare `remove_const` is used and you would still have access to that module, e.g. I know of no gem doing that. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-102304 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams).
So sure it's possible with remove_const with a made-up example. Is it done in practice? I don't think so.
You can't argue that the existing implementation is sound if it's not, and you can't argue that this proposal breaks soundness if it's already broken. The argument doesn't stand up to scrutiny. I can certainly understand the appeal of `eval(class.name) == class` always being true. However, it's trivial to demonstrate that it's not the case, even without this proposal. If you think that's important, then we should consider how to fix it, because it's an entirely separate issue from this, even if they are tangentially related. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-102315 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by matz (Yukihiro Matsumoto). I agree with adding an ability to name classes/modules. But I am against the method name `name=`. It's too short and handy (and tempting to abuse). If we could have a better name, I accept this proposal. Matz. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103456 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). Thanks Matz, are you happy with `#set_temporary_name` which is how it's referred to internally (and in contrast to assigning a permanent name when you assign to an actual constant). ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103457 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by matz (Yukihiro Matsumoto). Unfortunately, I am not 100% satisfied for both names. For `set_temporary_name`, the name implies limited scope or time of name availability, but it's not. For `set_anonymous_name`, the name assumes the target is an anonymous (nameless) class or module, but it's not. If I have to choose one from above two, I'd take `set_temporary_name`, but I still want to seek a better name. Matz. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103461 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). For more context, CRuby itself refers to permanent and temporary names, and anonymous components/names. Here: https://github.com/ruby/ruby/blob/d6bddcb0137d5a640eb22fbd17f9aa83f71fbd48/v... ``` /** * Returns +classpath+ of _klass_, if it is named, or +nil+ for * anonymous +class+/+module+. A named +classpath+ may contain * an anonymous component, but the last component is guaranteed * to not be anonymous. <code>*permanent</code> is set to 1 * if +classpath+ has no anonymous components. There is no builtin * Ruby level APIs that can change a permanent +classpath+. */ static VALUE classname(VALUE klass, bool *permanent) {...} ``` and here: https://github.com/ruby/ruby/blob/d6bddcb0137d5a640eb22fbd17f9aa83f71fbd48/i... ``` struct rb_classext_struct { // ... bool permanent_classpath : 1; // ... VALUE classpath; }; ``` It's also referred to as a temporary class path here: https://github.com/ruby/ruby/blob/d6bddcb0137d5a640eb22fbd17f9aa83f71fbd48/v... ``` static VALUE make_temporary_path(VALUE obj, VALUE klass) { VALUE path; switch (klass) { case Qnil: path = rb_sprintf("#<Class:%p>", (void*)obj); break; case Qfalse: path = rb_sprintf("#<Module:%p>", (void*)obj); break; default: path = rb_sprintf("#<%"PRIsVALUE":%p>", klass, (void*)obj); break; } OBJ_FREEZE(path); return path; } ``` I don't think there is a better name if you want to be consistent with the existing implementation and documentation. I will wait for a week to see if anyone has any further feedback, otherwise I'll use the name `set_temporary_name`. Does that seem reasonable? ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103464 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Dan0042 (Daniel DeLorme). matz (Yukihiro Matsumoto) wrote in #note-11:
I agree with adding an ability to name classes/modules. But I am against the method name `name=`. It's too short and handy (and tempting to abuse).
What if `name=` was a no-op or raised an error if the class already has a permanent name? That way it would be hard to abuse. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103474 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ufuk (Ufuk Kayserilioglu). If we are adding a setter method, do we really need the `set_` prefix? Moreover, does assigning a "temporary name" change the result of calling `#name`? IMO, we should add `#temporary_name=` and `#temporary_name` methods, and a non-`nil` value for "temporary name" should _only_ change the behaviour of `#to_s` and `#inspect`, not `#name`. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103478 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Dan0042 (Daniel DeLorme). Note that `#name` already returns the temporary name ```ruby m1 = Module.new m1::NAMED = m2 = Module.new m2.name #=> "#<Module:0x00005606bc180560>::NAMED" ``` So if you're talking about changing that current behavior, it may be ok but I'm not sure. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103479 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). @matz do you mind clarifying what kind of abuse you are concerned about and whether limitations on `Module#name=` as outlined above are sufficient to consider using `#name=`?
What if name= was a no-op or raised an error if the class already has a permanent name? That way it would be hard to abuse.
---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103484 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by timcraft (Tim Craft). What about `Module#label=` and `Class#label=` etc? * If the value e.g. `"fake name"` cannot be used to reference the class then is that really a name? * The naming of the `#labeled_module` and `#labeled_class` methods posted in the description suggest label. * A string that contains descriptive text for human / display purposes and isn't meaningful otherwise... in user interfaces that's commonly called a label. (A similar alternative would be `#display_name` but that feels clunkier than `#label`.) * With the implementation @ufuk suggests (`#to_s` and `#inspect` changing behaviour if the attribute is not nil), that would seem to satisfy the use case of nicer debugging output, without needing to affect `#name`. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103498 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). @timcraft thanks for your input. All those issues have already been discussed, and it won't work for nested classes or existing code that uses class names without a huge retrofit. I also don't like introducing `label` as a new concept since it's entirely unrelated to anything that already exists in the documentation and semantically doesn't really align up with what is known internally as a temporary class/module name. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103502 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). Based on the discussion with Matz, here is the updated proposal: ```ruby c = Class.new # => #<Class:0x00000001031b99d8> c.set_temporary_name("Hello") # => Hello C = c # => C C.set_temporary_name("Hello") # `set_temporary_name': can't change permanent classpath (TypeError) ``` ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103575 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). I've updated the PR with documentation and tests: https://github.com/ruby/ruby/pull/7483 ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103576 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by matz (Yukihiro Matsumoto). Accepted. Thank you. Matz. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103585 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Eregon (Benoit Daloze). @matz Are you really OK with things like: ```ruby c = Class.new c.set_temporary_name "String" c.new.foo # => undefined method 'foo' for #<String:0x00007efc38711fc0> (NoMethodError) c = Class.new c.set_temporary_name "Object" c.new.foo # => undefined method 'foo' for #<Object:0x00007efc38711fc0> (NoMethodError) ``` The potential to use it wrong seems extremely high to me. I think a simple way to avoid this confusion is to raise an exception if the name given to set_temporary_name starts with an upper-case letter. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103587 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). @Eregon I understand your point, but why would anyone do that? Isn't that kind of shooting yourself in the foot? And in any case, your example is already trivially possible without this PR/change: ``` c = Class.new String = c c.new.foo # => undefined method `foo' for #<String:0x00000001308896c8> (NoMethodError) ``` ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103588 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by byroot (Jean Boussier). Aside from the feature itself, I must say I'm very surprised by the `set_` prefix of that method, it's quite rare in Ruby. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103590 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). My understanding is, because it's not strictly an assignment, it shouldn't look like that of the user. Also, it's more convenient to use: ```ruby my_class = Class.new do set_temporary_name "my_class" end ``` Using `name=` or `temporary_name=` would always be prefixed by `self` as you know it would otherwise introduce a local variable. So, I think all things considered, it's okay. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103591 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Eregon (Benoit Daloze). ioquatix (Samuel Williams) wrote in #note-25:
@Eregon I understand your point, but why would anyone do that? Isn't that kind of shooting yourself in the foot?
Well, even the docs and specs you added in that PR do that, it's inviting people to do it without telling them the big problem or protecting against it.
And in any case, your example is already trivially possible without this PR/change:
Nope, that is fine (besides of course the bad idea to override a core constant, but at least you get a warning for that), because the class of that object can in fact be referenced by `String` or at least it has been related to the constant path `String` at some point. `Class.new.tap { _1.set_temporary_name "Foo" }` has never been related to the constant `Foo`. It's a lie. And if you look at usages of `labeled_module`/`labeled_class` e.g. with `git grep labeled_ test` you can see for almost all of them it would be confusing to use `set_temporary_name`. First they should use a non-valid constant name to make it clear e.g., what is currently labeled as `klass = EnvUtil.labeled_class("Parent")` cannot be accessed through `Parent` (otherwise good luck to write tests or any Ruby if you regularly cannot trust the output of a NoMethodError due to this new feature/bug). ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103594 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Dan0042 (Daniel DeLorme). @ioquatix, how would you feel about raising an error if the temporary name is a valid constant name? ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103595 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ufuk (Ufuk Kayserilioglu). ioquatix (Samuel Williams) wrote in #note-25:
And in any case, your example is already trivially possible without this PR/change:
``` c = Class.new String = c c.new.foo # => undefined method `foo' for #<String:0x00000001308896c8> (NoMethodError) ```
There is a big difference with what's possible today and what would be possible after this change: **Curently**: ```ruby c = Class.new String = c # both of the following show basically the same error, since `String` now means something else. c.new.upcase # => undefined method `upcase` for #<String:0x00000001308896c8> (NoMethodError) String.new.upcase # => undefined method `upcase` for #<String:0x00000001308896ca> (NoMethodError) ``` **After this change**: ```ruby c = Class.new c.set_temporary_name "String" # this is now a confusing error c.new.upcase # => undefined method `upcase` for #<String:0x00000001308896c8> (NoMethodError) # since this is not an error at all String.new.upcase # => "" ``` In my opinion, it is very confusing to refer to something as `"String"` when actually referring to the `String` constant gives you different behaviour. I believe this exactly what @eregon is trying to prevent, and I am in agreement. The current "temporary names" are things like `"<Module:0x00005606bc180560>"` which are clearly not references to constants, due to the naming, and any other temporary should also be explicitly non-constant names to prevent any confusion like the above. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103596 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). I am okay with restricting names to be not-constant-names, e.g. ```c if (rb_is_const_name(name)) { rb_raise(rb_eArgError, "name must not be valid constant name"); } ``` However, this will prevent `labeled_class`/`labeled_module` from using `set_temporary_name`, at least until those labels are updated to be "not a constant name" or we remove this restriction. When I did this change, ~35 tests failed. I don't know if all my use cases will be satisfied, so I can try to introduce this limitation, and if I'm satisfied, I can leave it. Otherwise, I might revisit it if such a restriction turns out to be an issue. Ultimately, I don't disagree that such things can be confusing. It's pretty obvious how such a feature can be used incorrectly, as can many features of Ruby. @ufuk your example is reasonable, but it seems like it's fairly trivial to make it confusing as the first: ```ruby old_string = String c = Class.new String = c s = c.new String = old_string p (s.upcase rescue $!) p String.new.upcase ``` I have yet to see an example of something that can be done with `set_temporary_name` that can't be done with a few lines of code that work on Ruby 3.2 today. Anyone can package the above code into a method, e.g. ```ruby def set_name(thing, name) thing.set_temporary_name(name) return thing rescue ArgumentError Object.class_eval do if current = const_get(name) remove_const(name) end const_set(name, thing) remove_const(name) ensure if current const_set(name, current) end end return thing end ``` Such an implementation is pretty trivial and bypasses any protections we can add to `set_temporary_name`. Yes, maybe we make it a little harder? But there are valid use cases which we now can't support directly. Ruby is a dynamic language, and this is a consequence of such dynamic behaviour which cannot, realistically, be completely prevented. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103597 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Dan0042 (Daniel DeLorme).
However, this will prevent `labeled_class`/`labeled_module` from using `set_temporary_name`, at least until those labels are updated to be "not a constant name" or we remove this restriction. When I did this change, ~35 tests failed. I don't know if all my use cases will be satisfied, so I can try to introduce this limitation, and if I'm satisfied, I can leave it. Otherwise, I might revisit it if such a restriction turns out to be an issue.
Ah interesting, I didn't realize it was already used that way. Since the ruby main repo already demonstrates how to "lie" about the class name in a sensible and useful way, I believe this is perfectly fine.
Ruby is a dynamic language, and this is a consequence of such dynamic behaviour which cannot, realistically, be completely prevented.
FWIW, I 100% agree. As Matz himself [said](https://bugs.ruby-lang.org/issues/15723#note-2):
The **possibility** to make code cryptic itself should not be the reason to withdraw a feature.
---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103599 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Eregon (Benoit Daloze). Dan0042 (Daniel DeLorme) wrote in #note-32:
Ah interesting, I didn't realize it was already used that way. Since the ruby main repo already demonstrates how to "lie" about the class name in a sensible and useful way, I believe this is perfectly fine.
I think there is a misunderstanding, currently there is no lying in exception messages showing the module name of such a labeled module: ```ruby # labeled_class from the description c = labeled_class("Parent") c.new.foo # => undefined method `foo' for #<#<Class:0x00007f1c4c1f5878>:0x00007f1c4c1f50a8> (NoMethodError) ``` If `set_temporary_name` is unrestricted, it would be (for `labeled_class("Parent")`): ```ruby c.new.foo # => undefined method `foo' for #<Parent:0x00007f1c4c1f50a8> (NoMethodError) ``` which would naturally make you look for a class called `Parent` except either there isn't one or it's not the same class, which is rather confusing.
However, this will prevent labeled_class/labeled_module from using set_temporary_name, at least until those labels are updated to be "not a constant name" or we remove this restriction.
This seems very easy to address, labeled_module/labeled_class could wrap the name in `<...>` or `#<...>` or `#<Class:...>` or the callers could start with a lowercase letter, etc. All these make it clear those are not the constant paths (and never have been) of these anonymous modules, which is what I believe is most important here. Every Rubyist expects the name of a module if it looks like a constant path to be a way to reach it, let's preserve that. Yes it's not a guarantee and yes it's possible to break it, but production code doing that would just be broken code. And this unrestricted `set_temporary_name` would make super easy to break it, without even realizing that, that I believe would make it a very confusing and dangerous feature, because it breaks something that every Rubyist relies on every day, not on purpose. It's easy to add the restriction that `set_temporary_name` can only be used with a name which is not a valid constant path now. It's impossible to add it later. I am sure many Rubyists will regret it if we don't add this restriction which preserves the design of Ruby module naming. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103600 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by ioquatix (Samuel Williams). Status changed from Open to Closed Thanks everyone for your input. To start with, we adopted the limitation of only allowing non-constant names. I think this is a reasonable limitation but it prevents some usage for existing cases. If it becomes a problem, we can revisit it. ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103613 * Author: ioquatix (Samuel Williams) * Status: Closed * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by sawa (Tsuyoshi Sawada). Given that we have `const_set`, the name for this feature should be `temporary_name_set`, not `set_temporary_name`. Don't you think so? ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103626 * Author: ioquatix (Samuel Williams) * Status: Closed * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
Issue #19521 has been updated by Dan0042 (Daniel DeLorme). @sawa there are also methods that start with `set_`, for example `set_trace_func` and `set_encoding`. I think one difference is that most `xyz_set` methods tend to also have a `xyz_get` counterpart. Which is not the case for `set_temporary_name`. ObjectSpace.each_object(Module){ |c| a=c.instance_methods(false).grep(/\A[gs]et_/); p c=>a unless a.empty? } {Exception=>[:set_backtrace]} {#<Class:Kernel>=>[:set_trace_func]} {Thread=>[:set_trace_func]} {IO::Buffer=>[:get_value, :get_values, :set_value, :set_values, :get_string, :set_string]} {ARGF.class=>[:set_encoding]} {IO=>[:set_encoding, :set_encoding_by_bom]} ObjectSpace.each_object(Module){ |c| a=c.instance_methods(false).grep(/_[gs]et\z/); p c=>a unless a.empty? } {Enumerable=>[:to_set]} {Kernel=>[:instance_variable_get, :instance_variable_set]} {Module=>[:const_get, :class_variable_get, :const_set, :class_variable_set]} {Thread=>[:thread_variable_get, :thread_variable_set]} {Binding=>[:local_variable_get, :local_variable_set]} {#<Class:Gem::Requirement>=>[:source_set]} ---------------------------------------- Feature #19521: Support for `Module#name=` and `Class#name=`. https://bugs.ruby-lang.org/issues/19521#change-103737 * Author: ioquatix (Samuel Williams) * Status: Closed * Priority: Normal ---------------------------------------- See https://bugs.ruby-lang.org/issues/19450 for previous discussion and motivation. [This proposal](https://github.com/ruby/ruby/pull/7483) introduces `Module#name=` (and thus also `Class#name=`) to set the temporary class name. The name assignment has no effect if the module/class already has a permanent name. ```ruby c = Class.new do self.name = "fake name" end c = Class.new c.name = "fake name" ``` Alternatively, we could use `set_name`: ```ruby Class.new do set_name "fake_name" end ``` Setting the name of a class changes its current name, irrespective of whether it's been assigned a permanent name, or has nested modules/classes which have cached a previous name. We might like to limit the cases where a name is set, e.g. only once, only if the name is nil, or only if it's not already permanent. There is no real harm in any of those options, just inconsistency. ## Example usage The current Ruby test suite has code which shows the usefulness of this new method: ```ruby def labeled_module(name, &block) Module.new do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_module def labeled_class(name, superclass = Object, &block) Class.new(superclass) do singleton_class.class_eval { define_method(:to_s) {name} alias inspect to_s alias name to_s } class_eval(&block) if block end end module_function :labeled_class ``` The updated code would look like this: ```ruby def labeled_module(name, &block) Module.new do self.name = name class_eval(&block) if block end end def labeled_class(name, superclass = Object, &block) Class.new(superclass) do self.name = name class_eval(&block) if block end end module_function :labeled_class ``` Because the name cannot be set as part of `.new`, we have to have a separate block to set the name, before calling `class_eval`. I think the ergonomics and performance of this are slightly worse than the [counter proposal](https://bugs.ruby-lang.org/issues/19520). -- https://bugs.ruby-lang.org/
participants (10)
-
byroot (Jean Boussier) -
Dan0042 (Daniel DeLorme)
-
Eregon (Benoit Daloze)
-
Eregon (Benoit Daloze) -
ioquatix (Samuel Williams)
-
ioquatix (Samuel Williams)
-
matz (Yukihiro Matsumoto)
-
sawa (Tsuyoshi Sawada)
-
timcraft (Tim Craft)
-
ufuk (Ufuk Kayserilioglu)