[ruby-core:117449] [Ruby master Bug#20412] UTF-8 String encoding behavior differs between 3.2, 3.3 and master
Issue #20412 has been reported by bannable (Joe Truba). ---------------------------------------- Bug #20412: UTF-8 String encoding behavior differs between 3.2, 3.3 and master https://bugs.ruby-lang.org/issues/20412 * Author: bannable (Joe Truba) * Status: Open * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- When a String that contains only a `\0` byte is mutated by an extension to an invalid UTF-8 sequence, calling `.encode('UTF-8')` does not consistently raise `UndefinedConversionError` across ruby versions. When the string is longer than 1 byte, all versions I've tested correctly raise `UndefinedConversionError`. For Ruby 3.2, `UndefinedConversionError` being raised appears to depend on where the string was originally allocated. For Ruby 3.3, `UndefinedConversionError` is never raised. For master ad90fdd24c, `UndefinedConversionError` is always correctly raised. I haven't been able to find a bug for this, but it seems like there is a fix in master that should be backported to at least 3.2 and 3.3. I have not tested 3.1. The attached reproducer depends on `rbnacl` because it is minimized from a cryptographic project, and I wasn't able to ## Expected Output For all versions: ``` $ ruby repro.rb 1 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ruby repro.rb 2 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ## Actual Output ### Ruby 3.2 ``` $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 1 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 2 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby 3.3 ``` $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 1 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "FAIL: ciphertext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 2 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby Master ``` $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 1 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 2 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ---Files-------------------------------- repro.rb (2.31 KB) -- https://bugs.ruby-lang.org/
Issue #20412 has been updated by nobu (Nobuyoshi Nakada). Maybe related to code range cached flags (#19902 ?). ---------------------------------------- Bug #20412: UTF-8 String encoding behavior differs between 3.2, 3.3 and master https://bugs.ruby-lang.org/issues/20412#change-107836 * Author: bannable (Joe Truba) * Status: Open * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- When a String that contains only a `\0` byte is mutated by an extension to an invalid UTF-8 sequence, calling `.encode('UTF-8')` does not consistently raise `UndefinedConversionError` across ruby versions. When the string is longer than 1 byte, all versions I've tested correctly raise `UndefinedConversionError`. For Ruby 3.2, `UndefinedConversionError` being raised appears to depend on where the string was originally allocated. For Ruby 3.3, `UndefinedConversionError` is never raised. For master ad90fdd24c, `UndefinedConversionError` is always correctly raised. I haven't been able to find a bug for this, but it seems like there is a fix in master that should be backported to at least 3.2 and 3.3. I have not tested 3.1. The attached reproducer depends on `rbnacl` because it is minimized from a cryptographic project, and I wasn't able to reduce it further. ## Expected Output For all versions: ``` $ ruby repro.rb 1 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ruby repro.rb 2 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ## Actual Output ### Ruby 3.2 ``` $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 1 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 2 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby 3.3 ``` $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 1 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "FAIL: ciphertext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 2 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby Master ``` $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 1 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 2 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ---Files-------------------------------- repro.rb (2.31 KB) -- https://bugs.ruby-lang.org/
Issue #20412 has been updated by etienne (Étienne Barrié). Hey, I cannot reproduce using the ruby:3.2.3 docker image and with my local installation of Ruby 3.2.3 and 3.2.2. In all these cases, I get "OK" "is not valid UTF-8". I just changed the script to always use size 1 and bundler/inline: ```ruby # encoding: ASCII-8BIT # frozen_string_literal: false require "bundler/inline" gemfile(true) do source "https://rubygems.org" gem "rbnacl" end p "RUBY: #{RUBY_VERSION}" require 'rbnacl' class Encrypter extend RbNaCl::Sodium sodium_type :stream sodium_primitive :xchacha20 sodium_function :stream_xchacha20_xor, :crypto_stream_xchacha20_xor, %i[pointer pointer ulong_long pointer pointer] attr_reader :key def initialize(key) @key = key end def encrypt_with_rbnacl_buffer(nonce, message) c = RbNaCl::Util.zeros(message.bytesize) self.class.stream_xchacha20_xor(c, message, message.bytesize, nonce, key) c end def encrypt_with_local_buffer(nonce, message) c = "\0" * message.bytesize self.class.stream_xchacha20_xor(c, message, message.bytesize, nonce, key) c end end begin "\xC0".encode('UTF-8') p 'FAIL: plaintext is not valid UTF-8 and did not error during encoding to UTF-8' rescue StandardError end SIZE = 1 input = ("\xC0" * SIZE) + ' ' nonce = 'B' * 24 key = 'A' * 32 enc = Encrypter.new(key) ciphertext_rbnacl = enc.encrypt_with_rbnacl_buffer(nonce, input) ciphertext_local = enc.encrypt_with_local_buffer(nonce, input) plaintext_rbnacl = enc.encrypt_with_rbnacl_buffer(nonce, ciphertext_rbnacl) plaintext_local = enc.encrypt_with_local_buffer(nonce, ciphertext_local) begin input.encode('UTF-8') p 'FAIL: input is not valid UTF-8 and did not error during encoding to UTF-8' rescue Encoding::UndefinedConversionError end begin ciphertext_rbnacl.encode('UTF-8') p 'FAIL: ciphertext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8' rescue Encoding::UndefinedConversionError p 'OK: ciphertext_rbnacl is not valid UTF-8' end begin ciphertext_local.encode('UTF-8') p 'FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8' rescue Encoding::UndefinedConversionError p 'OK: ciphertext_local is not valid UTF-8' end begin plaintext_rbnacl.encode('UTF-8') p 'FAIL: plaintext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8' rescue Encoding::UndefinedConversionError p 'OK: plaintext_rbnacl is not valid UTF-8' end begin plaintext_local.encode('UTF-8') p 'FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8' rescue Encoding::UndefinedConversionError p 'OK: plaintext_local is not valid UTF-8' end ``` Which version of libsodium are you using? Perhaps some specific version mutates a char * string? ---------------------------------------- Bug #20412: UTF-8 String encoding behavior differs between 3.2, 3.3 and master https://bugs.ruby-lang.org/issues/20412#change-107853 * Author: bannable (Joe Truba) * Status: Open * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- When a String that contains only a `\0` byte is mutated by an extension to an invalid UTF-8 sequence, calling `.encode('UTF-8')` does not consistently raise `UndefinedConversionError` across ruby versions. When the string is longer than 1 byte, all versions I've tested correctly raise `UndefinedConversionError`. For Ruby 3.2, `UndefinedConversionError` being raised appears to depend on where the string was originally allocated. For Ruby 3.3, `UndefinedConversionError` is never raised. For master ad90fdd24c, `UndefinedConversionError` is always correctly raised. I haven't been able to find a bug for this, but it seems like there is a fix in master that should be backported to at least 3.2 and 3.3. I have not tested 3.1. The attached reproducer depends on `rbnacl` because it is minimized from a cryptographic project, and I wasn't able to reduce it further. ## Expected Output For all versions: ``` $ ruby repro.rb 1 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ruby repro.rb 2 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ## Actual Output ### Ruby 3.2 ``` $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 1 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 2 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby 3.3 ``` $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 1 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "FAIL: ciphertext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 2 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby Master ``` $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 1 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 2 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ---Files-------------------------------- repro.rb (2.31 KB) -- https://bugs.ruby-lang.org/
Issue #20412 has been updated by bannable (Joe Truba). @eti etienne (Étienne Barrié) wrote in #note-3:
Hey,
I cannot reproduce using the ruby:3.2.3 docker image and with my local installation of Ruby 3.2.3 and 3.2.2.
In all these cases, I get "OK" "is not valid UTF-8". I just changed the script to always use size 1 and bundler/inline:
The input size isn't set correctly after your change to the script: ``` ➜ ~ ASDF_RUBY_VERSION=3.2.3 ruby repro.eti.rb 1 "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ➜ ~ ASDF_RUBY_VERSION=3.2.3 ruby repro.rb "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" ➜ ~ diff repro.eti.rb repro.rb 44,46c44 < SIZE = ARGV[0].to_i || 32 < < input = ("\xC0" * SIZE) + ' ' ---
input = "\xC0" ➜ ~
----------------------------------------
Bug #20412: UTF-8 String encoding behavior differs between 3.2, 3.3 and master
https://bugs.ruby-lang.org/issues/20412#change-107856
* Author: bannable (Joe Truba)
* Status: Open
* Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN
----------------------------------------
When a String that contains only a `\0` byte is mutated by an extension to an invalid UTF-8 sequence, calling `.encode('UTF-8')` does not consistently raise `UndefinedConversionError` across ruby versions. When the string is longer than 1 byte, all versions I've tested correctly raise `UndefinedConversionError`.
For Ruby 3.2, `UndefinedConversionError` being raised appears to depend on where the string was originally allocated.
For Ruby 3.3, `UndefinedConversionError` is never raised.
For master ad90fdd24c, `UndefinedConversionError` is always correctly raised.
I haven't been able to find a bug for this, but it seems like there is a fix in master that should be backported to at least 3.2 and 3.3.
I have not tested 3.1.
The attached reproducer depends on `rbnacl` because it is minimized from a cryptographic project, and I wasn't able to reduce it further.
## Expected Output
For all versions:
$ ruby repro.rb 1 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ruby repro.rb 2 "RUBY: [version]" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ## Actual Output ### Ruby 3.2 ``` $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 1 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.2.3 ruby -v; ASDF_RUBY_VERSION=3.2.3 ruby repro.rb 2 ruby 3.2.3 (2024-01-18 revision 52bb2ac0a6) [x86_64-linux] "RUBY: 3.2.3" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby 3.3 ``` $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 1 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "FAIL: ciphertext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: ciphertext_local is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_rbnacl is not valid UTF-8 and did not error during encoding to UTF-8" "FAIL: plaintext_local is not valid UTF-8 and did not error during encoding to UTF-8" $ ASDF_RUBY_VERSION=3.3.0 ruby -v; ASDF_RUBY_VERSION=3.3.0 ruby repro.rb 2 ruby 3.3.0 (2023-12-25 revision 5124f9ac75) [x86_64-linux] "RUBY: 3.3.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ### Ruby Master ``` $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 1 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" $ ASDF_RUBY_VERSION=ruby-dev ruby -v; ASDF_RUBY_VERSION=ruby-dev ruby repro.rb 2 ruby 3.4.0dev (2024-04-06T17:33:16Z master ad90fdd24c) [x86_64-linux] "RUBY: 3.4.0" "OK: ciphertext_rbnacl is not valid UTF-8" "OK: ciphertext_local is not valid UTF-8" "OK: plaintext_rbnacl is not valid UTF-8" "OK: plaintext_local is not valid UTF-8" ``` ---Files-------------------------------- repro.rb (2.31 KB) -- https://bugs.ruby-lang.org/
participants (3)
-
bannable (Joe Truba) -
etienne
-
nobu (Nobuyoshi Nakada)