Issue #21005 has been updated by Eregon (Benoit Daloze). I think adding end line and start/end columns is a straightforward and compatible extension of `source_location`. I will add that to the dev meeting agenda: https://bugs.ruby-lang.org/issues/20949 Changing to return a Hash (or an Array of 2 Strings) instead would be too incompatible, that would need to be a new method then. If it's a new method, I think we should return a "code location" object (could be `Ruby::CodeLocation` or so) and have the following methods (inspired from https://bugs.ruby-lang.org/issues/6012#note-19): * start_line * start_column * start_offset * end_line * end_column * end_offset * code or maybe source_code: gets the source of the Proc/Method/UnboundMethod if available, `nil` otherwise That last one seems particularly nice because it abstracts how it gets that source code, and allows for multiple implementations. For instance if the Ruby implementation keeps the source code in memory (or a compressed version of it) it could just use that, if it doesn't it would re-read from disk, etc. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111297 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by mame (Yusuke Endoh). I read the use case for #20999. In short, by the following DSL, ```ruby class Demo include Initable[[:key, :default, proc { Object.new }]] end ``` you want to generate the following code string, right? ```ruby def initialize(default = Object.new) @default = default end ``` I believe that the last position of Proc is not sufficient for your case, because of a here document. Consider the following proc. ```ruby proc { <<END } heredoc END ``` Where do you expect the end position of the Proc to be? The end brace? Or the end of “END” delimiter? Either way, your DSL will generate a broken Ruby code string. What you really need is not the end position information, but an AST node of Method, Proc, etc. ```ruby f = proc { <<END } heredoc END # What you really need node = Prism.node_for(f) # You can get all the locations including the here document pp node.block.body.body # => # [@ StringNode (location: (1,7)-(1,12)) # ├── flags: newline # ├── opening_loc: (1,7)-(1,12) = "<<END" # ├── content_loc: (2,0)-(3,0) = " heredoc\n" # ├── closing_loc: (3,0)-(3,3) = "END" # └── unescaped: " heredoc\n"] # You can even get the end position of the proc, if it is really sufficient for you p [node.location.end_line, node.location.end_column] #=> [1, 14] ``` ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111322 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by bkuhlmann (Brooke Kuhlmann). **Yusuke**: I went hunting for the `Prism.node_for` method/documentation but couldn't find it. If I understand you correctly, I think you are proposing adding the `.node_for` implementation to Prism? If so, I like the detailed information in your example especially when dealing with heredocs and being able to access content location. That would yield even greater flexibility for anyone implementing atop this data. To be more exact, I'm guessing the following could be amended to what Benoit proposed above then?: - content_line_start - content_line_end - content_column_start - content_column_end By the way, one slight correction to what you were asking above. This is what my DSL generates: ``` ruby # DSL class Demo include Initable[[:key, :default, proc { Object.new }]] end # End result. def initialize(default: Object.new) @default = default end ``` The emphasis is on `key` because `key` is an *optional* keyword parameter as defined in the [Method#parameters](https://docs.ruby-lang.org/en/master/Method.html#method-i-parameters) implementation. Essentially, my DSL reconstitutes the raw parameters answered back into a method signature where the third element in the 3-tuple is additional sugar (specific to my DSL) for providing a default value since `Method#parameters` only answers an array of tuples. **Jean**

I fear it may break code that splats the array

Ugh, yes. What about this instead? ``` ruby proc.source_location(as: :verbose) ``` This would give us room to expand the `as` keyword with different values to support different object shapes in the future (assuming this design expands and grows in future Ruby versions) without backing us into a corner.

Returning an actual object with named methods make it easier to understand what's being used and easier to extend later on.

Yeah, this would be most welcome. I know I gave an example of using a `Hash` above but icing on the cake would be to answer a `Data` instead object so you could simply ask for whatever attribute you need. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111330 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by Earlopain (Earlopain _).

But if we decide with returning a new class, instead of just retunring a longer array, I think the better API would be another method entirely.

Yes, I agree with that. `caller` and `caller_location` are also different methods. I don't think `source` would be a good name, it could just as easily return the source string. `source_info` definitly sounds better to me. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111338 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by tenderlovemaking (Aaron Patterson). Also just to be clear, I don't think the code I pasted above is _nice_ code, but it does work after the Prism bug is addressed. In particular this line is pretty heavy: ```ruby node_id = iseq.to_a[4][:node_id] ``` I think we should add a reader method on RubyVM::InstructionSequence to get the node id. It already has [some methods for accessing location information](https://github.com/tenderlove/ruby/blob/7d6573d6f9bc66ae60a275bab5e22c5c562c...), so I think adding the node id could be acceptable. However, I think such an addition is outside the scope of this ticket, so I will open a new ticket. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111344 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by tenderlovemaking (Aaron Patterson). mame (Yusuke Endoh) wrote in #note-12:

tenderlovemaking (Aaron Patterson) wrote in #note-11:

...

I think we should add a reader method on RubyVM::InstructionSequence to get the node id.

I don't think it is good for a user to handle `node_id` explicitly. Rather, I think Prism should provide a simple method to directly retrieve a node subtree of a Method/Proc object given, like `RubyVM::AST.of`.

I agree. The problem is that `RubyVM::AST` is built in to Ruby, so it has access to `rb_iseq_t` members. Prism cannot access fields on `rb_iseq_t`. My idea is to apply a patch like this to iseq.c: https://github.com/tenderlove/ruby/commit/9a54230012d8837a981e0ddec88384ab6e... Then add code to Prism like this: ```ruby require "prism" # Put the following code in Prism module Prism def self.ast_for iseq ast = Prism.parse(File.read(iseq.absolute_path)) node_id = iseq.node_id ast.value.breadth_first_search { |node| node.node_id == node_id } end end # User code is below f = proc { <<END } heredoc END iseq = RubyVM::InstructionSequence.of(f) tree = Prism.ast_for(iseq) p tree ``` I implemented the Prism method as a monkey patch just as demonstration. But the idea is the same as `RubyVM::AbstractSyntaxTree.of`, where `Prism.ast_for` takes an iseq object and returns the AST for that iseq. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111357 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by Dan0042 (Daniel DeLorme). Eregon (Benoit Daloze) wrote in #note-3:

If it's a new method, I think we should return a "code location" object (could be `Ruby::CodeLocation` or `Ruby::Location` or `Ruby::SourceLocation` or so) and have the following methods (inspired from https://bugs.ruby-lang.org/issues/6012#note-19): * start_line * end_line

I really like the idea of a `#source` method that returns a `Ruby::SourceLocation` object. However, when there's a start and end, I believe Ruby should ideally align with its own core conventions and return a `Range`. For example, `method.source.lines => start...end`. While I understand concerns about the allocation of `Range` objects and performance, I feel that: 1) this might be an example of premature micro-optimization, and 2) from an API design perspective, a `Range` object feels like the natural default. Separate `start`/`end` accessors could remain a low-level, performance-focused API if truly necessary. As an alternative to `start`/`end` accessors, it would be even better if the `Range`-returning method could be optimized via opcode. Referring back to the idea of `Range#bounds` in #20080, we could have something like `start_line, end_line = method.source.lines.bounds`, which could be optimized via opcode to avoid allocating a `Range` object entirely. It would be great to see Ruby continue to embrace its own language idioms and explore such optimizations for a more elegant API. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111367 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by Eregon (Benoit Daloze). The original proposal has been accepted (adding end line and column information), see https://bugs.ruby-lang.org/issues/6012#note-25 I guess it makes sense to keep this open until `Prism.node_for` or similar is added though. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-111405 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by jeremyevans0 (Jeremy Evans). bkuhlmann (Brooke Kuhlmann) wrote in #note-18:

Any chance this could be fixed and included in time for the Ruby 4.0.0 release?

This is already implemented in Ruby 4.0.0-preview2 for Proc, Method, and UnboundMethod, but not Binding. ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-115438 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/

Issue #21005 has been updated by Eregon (Benoit Daloze). Assignee set to Eregon (Benoit Daloze) ---------------------------------------- Feature #21005: Update the source location method to include line start/stop and column start/stop details https://bugs.ruby-lang.org/issues/21005#change-115916 * Author: bkuhlmann (Brooke Kuhlmann) * Status: Open * Assignee: Eregon (Benoit Daloze) ---------------------------------------- ## Why 👋 Hello. After discussing with Kevin Newton and Benoit Daloze in [Feature 20999](https://bugs.ruby-lang.org/issues/20999), I'd like to propose adding line start/stop and column start/stop information to the `#source_location` method for the following objects: - [Binding](https://docs.ruby-lang.org/en/master/Binding.html) - [Proc](https://docs.ruby-lang.org/en/master/Proc.html) - [Method](https://docs.ruby-lang.org/en/master/Method.html) - [UnboundMethod](https://docs.ruby-lang.org/en/master/UnboundMethod.html) At the moment, when using `#source_location`, you only get the following information: ``` ruby def demo = "A demonstration." # From disk. method(:demo).source_location # ["/Users/bkuhlmann/Engineering/Misc/demo", 15] # From memory. method(:demo).source_location # ["(irb)", 3] ``` Notice, when asking for the source location, we only get the path/location as the first element and the line number as the second element but I'd like to obtain a much richer set of data which includes line start/stop and column start/stop so I can avoid leaning on the `RubyVM` for this information. Example: ``` ruby def demo = "A demonstration." # From disk. instructions = RubyVM::InstructionSequence.of method(:demo) puts [instructions.absolute_path, *instructions.to_a.dig(4, :code_location)] [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 0, # Column start. 15, # Line stop. 29 # Column stop. ] # From memory. instructions = RubyVM::InstructionSequence.of method(:demo) puts instructions.script_lines [ "def demo = \"A demonstration.\"\n", "" ] ``` By having access to the path (or lack thereof in case of IRB), line start/stop, and column start/stop, this means we could avoid using the RubyVM to obtain raw source code for any of these objects. This would not only enhance debugging situations but also improve Domain Specific Languages that wish to leverage this information for introducing new features and/or new debugging capabilities to the language. ## How Building upon the examples provided above, I'd like to see `Binding`, `Proc`, `Method`, and `UnboundMethod` respond to `#source_location` as follows: ``` ruby [ "/Users/bkuhlmann/Engineering/Misc/demo", # Source path. 15, # Line start. 15, # Line stop. 0, # Column start. 29 # Column stop. ] ``` Notice, for data grouping purposes, I changed the array structure to always start with the path as the first element, followed by line information, and ending with column information. Alternatively, it could might be nice to improve upon the above by answering a hash each time, instead, for a more self-describing data structure. Example: ``` ruby { path: "/Users/bkuhlmann/Engineering/Misc/demo", line_start: 15, line_stop: 15, column_start: 0, column_stop: 29 } ``` For in-memory, situations like IRB, it would be nice to answer the equivalent of `RubyVM::InstructionSequence#script_lines` which would always be an `Array` with no line or column information since only the source code is necessary. Example: ``` ruby [ "def demo = \"A demonstration.\"\n", "" ] ``` From a pattern matching perspective, this could provide the best of both worlds especially if information is answered as either a `Hash` or and `Array`. Example: ``` def demo = "A demonstration." case method(:demo).source_location in Hash then puts "Source information obtained from disk." in Array then puts "Source obtained from memory." else fail TypeError, "Unrecognized source location type." end ``` This above is only a simple example but there's a lot we could do with this information if the above pattern match was enhanced to deal with the extraction and formatting of the actual source code! ## Notes This feature request is related to the following discussions in case more context is of help: - [Feature 6012](https://bugs.ruby-lang.org/issues/6012) - [Feature 20999](https://bugs.ruby-lang.org/issues/20999) -- https://bugs.ruby-lang.org/