Issue #19972 has been updated by Eregon (Benoit Daloze). I think this makes sense and would be better/clearer and make it easier if a user wants to remove all user-installed gems. We should make sure it does not hurt application startup since it might have to look in more places, but probably insignificant since this search is likely only done on gem activation time or so. Some remarks: * Default gems have almost no files, e.g. `lib/ruby/gems/3.2.0/gems/fcntl-1.0.2` is empty and `lib/ruby/gems/3.2.0/gems/racc-1.6.2` only has `bin/racc`. But still it definitely feels better to separate those. BTW `gem install`'ing the same version tend to cause troubles, probably RubyGems should reject that and just use the default gem if same version. Also this might remove the need for `specifications/default` which is a bit odd. * Bundled gems are supposed to be "just like another gem, they just happen to be shipped with Ruby without needing gem install". Maybe those make sense to keep together with user gems? Although from the POV that they are sort of "stdlib"/"standard gems" it makes sense to separate them. ---------------------------------------- Bug #19972: Install default/bundled gems into dedicated directories https://bugs.ruby-lang.org/issues/19972#change-105077 * Author: vo.x (Vit Ondruch) * Status: Open * Priority: Normal * ruby -v: ruby 3.3.0dev (2023-10-24 master c44d65427e) [x86_64-linux] * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- I think that the current situation, where the same directory (lets call it `Gem.default_dir`) is used for default/bundled gems as well as for user installed gems, is suboptimal. During the times, this has caused us quite some issue on Fedora. Historically, we redefined the `Gem.default_dir` to user home directory, to avoid the mixing of system gems and user installed gems. Unfortunately, with advent of default/bundled gems, we were facing issues that these gems were suddenly not listed, etc. I am realizing this issue in full once again since the "user install" RubyGems feature has landed [1]. I also think that we have arrived to this situation by evolution, not by design. Therefore my proposal is: Keep the `Gem.default_dir` for user `gem install`ed gems and lets install default and bundled gems into separate dedicated directories. Have separate `Gem.bundled_gems_dir` and `Gem.default_gems_dir` structures. Of course, if `Gem.default_dir == Gem.bundled_gems_dir == Gem.default_gems_dir`, we still can have the current layout. I have a simple POC here: https://github.com/ruby/ruby/pull/8761 BTW I have reported it here, because I think that RubyGems provides all it is needed. So it is not RubyGems ticket after all. However, I believe that RubyGems could benefit from this long term and some simplifications/cleanups would be possible. [1]: https://github.com/rubygems/rubygems/pull/5327 -- https://bugs.ruby-lang.org/

Issue #19972 has been updated by rubyFeedback (robert heiler). I also like the overall idea - aka to have more fine-tuned control. While I don't run into the same issues described as vo.x, I do have to work in restricted areas every now and then; university campus sites are a good example, where I tend to have a Linux system with mostly just my home directory available. These tend to have outdated ruby installations. I get around that issue by simply changing $PATH and using a self-compiled ruby in my $HOME directory then. But sometimes it is a bit confusing since you end up with multiple different ruby versions and gem versions as well. I think so too. Lateron changes sometimes invalidate or simplify prior assumptions made. See bundler's integration into rubygems; before that I remember drbrain/dblack (I forgot the nick right now) pointing that out how they use partially overlapping functionality (before the merge; and I am still not sure if the merge is totally complete now. I am mostly using gems, so I have no idea about bundler). I have not thought about whether the proposal he made comes with disadvantages or trade-off, but the general idea to allow for more fine-tuned control may be useful. I think it is ok to suggest it on MRI here because it also asks the ruby core devs about real world usage of gems (and problems). Again, I have no idea whether the proposed suggestion solves this issue or not, but I personally can relate to some of the issues pointed out. The current way can be confusing, also because as in the example provided, you don't easily know where ruby finds stuff in such dual-ruby setups in a restricted setting. A user may install gems via --user-install but perhaps due to some odd situation may pick up other gems from another directory. For instance, when I install jruby, it also uses the same directory that I used for my self-compiled MRI on my home system; then it reports that ruby-gtk3 related gems need to be recompiled, but these were installed by MRI ruby (and don't work on jruby anyway). So this is also confusing to me, and perhaps to other ruby users too (if they have a comparable use case). I think debian has had similar issues in the past too. So that's relatable. GoboLinux (and NixOS) even managed versioned directories for all applications installed. So one would have e. g. /Programs/Ruby/2.2.0/, /Programs/Ruby/3.2.1/ and so forth. Managing subdirectories makes sense as well. I guess the biggest question I have is how users can query all of this easily. The single most used command I tend to have for gem, aside from "gem install foobar", is "gem env". Should this show additional information? For instance, it could report which gems are installed where, via some new flag or so, e. g. "gem env extended" or "gem env full" or whatever else fits. This probably needs a few iteration steps until it works well. Perhaps vit can suggest some proposed steps, including which methods should work. We have Gem.default_dir right now but not Gem.bundled_gems_dir (and I am not sure about the API there, perhaps the name should be different; I can't think of a better name right now though). ---------------------------------------- Feature #19972: Install default/bundled gems into dedicated directories https://bugs.ruby-lang.org/issues/19972#change-105100 * Author: vo.x (Vit Ondruch) * Status: Open * Priority: Normal ---------------------------------------- I think that the current situation, where the same directory (lets call it `Gem.default_dir`) is used for default/bundled gems as well as for user installed gems, is suboptimal. During the times, this has caused us quite some issue on Fedora. Historically, we redefined the `Gem.default_dir` to user home directory, to avoid the mixing of system gems and user installed gems. Unfortunately, with advent of default/bundled gems, we were facing issues that these gems were suddenly not listed, etc. I am realizing this issue in full once again since the "user install" RubyGems feature has landed [1]. I also think that we have arrived to this situation by evolution, not by design. Therefore my proposal is: Keep the `Gem.default_dir` for user `gem install`ed gems and lets install default and bundled gems into separate dedicated directories. Have separate `Gem.bundled_gems_dir` and `Gem.default_gems_dir` structures. Of course, if `Gem.default_dir == Gem.bundled_gems_dir == Gem.default_gems_dir`, we still can have the current layout. I have a simple POC here: https://github.com/ruby/ruby/pull/8761 BTW I have reported it here, because I think that RubyGems provides all it is needed. So it is not RubyGems ticket after all. However, I believe that RubyGems could benefit from this long term and some simplifications/cleanups would be possible. [1]: https://github.com/rubygems/rubygems/pull/5327 -- https://bugs.ruby-lang.org/

Issue #19972 has been updated by vo.x (Vit Ondruch). Dan0042 (Daniel DeLorme) wrote in #note-5: These are for Ruby *libraries* as you say. Not for gems. On Fedora, we are occasionally using the vendor dir for our packages, but we prefer the gemified versions of libraries, no matter if RPM managed or `gem install`ed. For gems, the paths are ~~~ $ gem env ... snip ... - GEM PATHS: - /usr/local/lib/ruby/gems/3.3.0+0 - /builddir/.local/share/gem/ruby/3.3.0+0 ... snip ... ~~~ Although RubyGems know `vendor` dir, which is not even listed by `gem env`. Yep, something like this would be listed among the `GEM PATHS` by the command above. Plus also `bundled_gems` dir. I don't think that https://stdgems.org/ is relevant here, because it is 3rd party site. The proper documentation is here: https://github.com/ruby/ruby/blob/14bf7164a69944b4e54aa2502cb5749d700505e5/… https://github.com/ruby/ruby/blob/14bf7164a69944b4e54aa2502cb5749d700505e5/… And there are differencies such as: "They can be uninstalled" vs "They can be uninstallable from Ruby installation." My proposal is to install them into separate directories. But maybe the remark was not directed to me :) My proposal is to make this flexible enough to allow the situation as you describe, while I'd prefer: 1. a directory for default gems 2. a directory for bundled gems 3. directory for system wide installed gems 4. dir for user installed gems Please note that I deliberately not using terms such as "root-installed gems" or "Gem.user_dir for user-installed gems" to prevent too much implications. And if you look at my POC, it actually does not change anything in RubyGems, it just merely changes configuration. ---------------------------------------- Feature #19972: Install default/bundled gems into dedicated directories https://bugs.ruby-lang.org/issues/19972#change-105197 * Author: vo.x (Vit Ondruch) * Status: Open * Priority: Normal ---------------------------------------- I think that the current situation, where the same directory (lets call it `Gem.default_dir`) is used for default/bundled gems as well as for user installed gems, is suboptimal. During the times, this has caused us quite some issue on Fedora. Historically, we redefined the `Gem.default_dir` to user home directory, to avoid the mixing of system gems and user installed gems. Unfortunately, with advent of default/bundled gems, we were facing issues that these gems were suddenly not listed, etc. I am realizing this issue in full once again since the "user install" RubyGems feature has landed [1]. I also think that we have arrived to this situation by evolution, not by design. Therefore my proposal is: Keep the `Gem.default_dir` for user `gem install`ed gems and lets install default and bundled gems into separate dedicated directories. Have separate `Gem.bundled_gems_dir` and `Gem.default_gems_dir` structures. Of course, if `Gem.default_dir == Gem.bundled_gems_dir == Gem.default_gems_dir`, we still can have the current layout. I have a simple POC here: https://github.com/ruby/ruby/pull/8761 BTW I have reported it here, because I think that RubyGems provides all it is needed. So it is not RubyGems ticket after all. However, I believe that RubyGems could benefit from this long term and some simplifications/cleanups would be possible. [1]: https://github.com/rubygems/rubygems/pull/5327 -- https://bugs.ruby-lang.org/

Issue #19972 has been updated by vo.x (Vit Ondruch). I have made sure the test suite is green with this configuration. Although I am still not really convinced about the workaround I have put in place for the last remaining test failures: https://github.com/rubygems/rubygems/pull/7187 ---------------------------------------- Feature #19972: Install default/bundled gems into dedicated directories https://bugs.ruby-lang.org/issues/19972#change-105390 * Author: vo.x (Vit Ondruch) * Status: Assigned * Priority: Normal * Assignee: hsbt (Hiroshi SHIBATA) ---------------------------------------- I think that the current situation, where the same directory (lets call it `Gem.default_dir`) is used for default/bundled gems as well as for user installed gems, is suboptimal. During the times, this has caused us quite some issue on Fedora. Historically, we redefined the `Gem.default_dir` to user home directory, to avoid the mixing of system gems and user installed gems. Unfortunately, with advent of default/bundled gems, we were facing issues that these gems were suddenly not listed, etc. I am realizing this issue in full once again since the "user install" RubyGems feature has landed [1]. I also think that we have arrived to this situation by evolution, not by design. Therefore my proposal is: Keep the `Gem.default_dir` for user `gem install`ed gems and lets install default and bundled gems into separate dedicated directories. Have separate `Gem.bundled_gems_dir` and `Gem.default_gems_dir` structures. Of course, if `Gem.default_dir == Gem.bundled_gems_dir == Gem.default_gems_dir`, we still can have the current layout. I have a simple POC here: https://github.com/ruby/ruby/pull/8761 BTW I have reported it here, because I think that RubyGems provides all it is needed. So it is not RubyGems ticket after all. However, I believe that RubyGems could benefit from this long term and some simplifications/cleanups would be possible. [1]: https://github.com/rubygems/rubygems/pull/5327 -- https://bugs.ruby-lang.org/

Issue #19972 has been updated by vo.x (Vit Ondruch). Naming is hard obviously. When you mentioned that, `vendored_gems` immediately popped up on my mind, but there is already the `--vendor` option. Next I could think of was to shift the meaning a bit and rename `default_gems` => `std_lib` gems and `bundled_gems` => `default_gems`, which would have its own share of issues. Nevertheless, I am not that afraid of confusion with Bundler. ---------------------------------------- Feature #19972: Install default/bundled gems into dedicated directories https://bugs.ruby-lang.org/issues/19972#change-105401 * Author: vo.x (Vit Ondruch) * Status: Assigned * Priority: Normal * Assignee: hsbt (Hiroshi SHIBATA) ---------------------------------------- I think that the current situation, where the same directory (lets call it `Gem.default_dir`) is used for default/bundled gems as well as for user installed gems, is suboptimal. During the times, this has caused us quite some issue on Fedora. Historically, we redefined the `Gem.default_dir` to user home directory, to avoid the mixing of system gems and user installed gems. Unfortunately, with advent of default/bundled gems, we were facing issues that these gems were suddenly not listed, etc. I am realizing this issue in full once again since the "user install" RubyGems feature has landed [1]. I also think that we have arrived to this situation by evolution, not by design. Therefore my proposal is: Keep the `Gem.default_dir` for user `gem install`ed gems and lets install default and bundled gems into separate dedicated directories. Have separate `Gem.bundled_gems_dir` and `Gem.default_gems_dir` structures. Of course, if `Gem.default_dir == Gem.bundled_gems_dir == Gem.default_gems_dir`, we still can have the current layout. I have a simple POC here: https://github.com/ruby/ruby/pull/8761 BTW I have reported it here, because I think that RubyGems provides all it is needed. So it is not RubyGems ticket after all. However, I believe that RubyGems could benefit from this long term and some simplifications/cleanups would be possible. [1]: https://github.com/rubygems/rubygems/pull/5327 -- https://bugs.ruby-lang.org/