May 2024 - ruby-core - ml.ruby-lang.org

[ruby-core:117658] [Ruby master Feature#20448] Make coverage event hooking C API public
by ms-tob (Matt S) 27 Mar '26

27 Mar '26

Issue #20448 has been reported by ms-tob (Matt S). ---------------------------------------- Feature #20448: Make coverage event hooking C API public https://bugs.ruby-lang.org/issues/20448 * Author: ms-tob (Matt S) * Status: Open ---------------------------------------- # Abstract Gathering code coverage information is a well-known goal within software engineering. It is most commonly used to assess code coverage during automated testing. A lesser known use-case is coverage-guided fuzz testing, which will be the primary use-case presented in this issue. This issue exists to request that Ruby coverage event hooking be made part of its official, public C API. # Background Ruby currently provides a number of avenues for hooking events *or* gathering coverage information: 1. The [Coverage](https://ruby-doc.org/3.3.0/exts/coverage/Coverage.html) module 2. The [TracePoint](https://ruby-doc.org/3.3.0/TracePoint.html) module 3. The [rb_add_event_hook](https://ruby-doc.org/3.3.0/extension_rdoc.html#label-Hoo… extension function Unfortunately, none of these pieces of functionality solve this issue's specific use-case. The `Coverage` module is not a great fit for real-time coverage analysis with an unknown start and stop point. Coverage-guided fuzz testing requires this. The `TracePoint` module and `rb_add_event_hook` are not able to hook branch and line coverage events. Coverage-guided fuzz testing typically tracks branch events. # Proposal The ultimate goal is to enable Ruby C extensions to process coverage events in real-time. I did some cursory investigation into the Ruby C internals to determine what it would take to achieve this, but I'm by no means an expert, so my list may be incomplete. The good news is that much of this functionality already exists, but it's part of the private, internal-only C API. 1. Make `RUBY_EVENT_COVERAGE_LINE` and `RUBY_EVENT_COVERAGE_BRANCH` public: https://github.com/ruby/ruby/blob/v3_3_0/vm_core.h#L2182-L2184 a. This would be an addition to the current public event types: https://github.com/ruby/ruby/blob/v3_3_0/include/ruby/internal/event.h#L32-… 2. Allow initializing global coverage state so that coverage tracking can be fully enabled a. Currently, if `Coverage.setup` or `Coverage.start` is not called, then coverage events cannot be hooked. I do not fully understand why this is, but I believe it has something to do with `rb_get_coverages` and `rb_set_coverages`. If calls to `rb_get_coverages` return `NULL` (https://github.com/ruby/ruby/blob/v3_3_0/iseq.c#L641-L647, https://github.com/ruby/ruby/blob/v3_3_0/iseq.c#L864-L868) then coverage hooking will not be enabled. I believe the `Coverage` module initializes that state via a `rb_set_coverages` call here: https://github.com/ruby/ruby/blob/v3_3_0/ext/coverage/coverage.c#L112-L120. b. So, to achieve this goal, a C extension would need to be able to call `rb_set_coverages` or somehow initialize the global coverage state. I've actually been able to achieve this functionality by calling undocumented features and defining `RUBY_EVENT_COVERAGE_BRANCH`: ```c #include <ruby.h> #include <ruby/debug.h> #define RUBY_EVENT_COVERAGE_BRANCH 0x020000 // ... rb_event_flag_t events = RUBY_EVENT_COVERAGE_BRANCH; rb_event_hook_flag_t flags = ( RUBY_EVENT_HOOK_FLAG_SAFE | RUBY_EVENT_HOOK_FLAG_RAW_ARG ); rb_add_event_hook2( (rb_event_hook_func_t) event_hook_branch, events, counter_hash, flags ); ``` If I call `Coverage.setup(branches: true)`, and add this event hook, then branch hooking works as expected. `rb_add_event_hook2` will still respect the `RUBY_EVENT_COVERAGE_BRANCH` value if its passed. But it would be better if I could rely on official functionality rather than undocumented features. The above two points would be requirements for this functionality, but there's an additional nice-to-have: 3. Extend the public `tracearg` functionality to include additional coverage information a. Currently, `tracearg` offers information like `rb_tracearg_lineno` and `rb_tracearg_path`. It would be helpful if it also provided additional coverage information like `coverage.c`'s column information and a unique identifier for each branch. Currently, I can only use `(path, lineno)` as a unique identifier for a branch because that's what's offered by the public API, but more information like column number would be helpful for uniquely identify branches. Since there can be multiple `if` statements on a single line, this can provide ambiguous identification for a branch event. # Use cases This use-case was born out of a new coverage-guided Ruby fuzzer: https://github.com/trailofbits/ruzzy. You can read more about its implementation details here: https://blog.trailofbits.com/2024/03/29/introducing-ruzzy-a-coverage-guided…. You can also find the Ruby C extension code behind its implementation here: https://github.com/trailofbits/ruzzy/blob/v0.7.0/ext/cruzzy/cruzzy.c#L220-L…. So, the primary use-case here is enabling real-time, coverage-guided fuzz testing of Ruby code. However, as mentioned in the abstract, gathering code coverage information is useful in many domains. For example, it could enable new workflows in standard unit/integration test coverage. It could also enable gathering coverage information in real-time as an application is running. I see this as the most generalized form of gathering code coverage information, and something like the `Coverage` module as a specialized implementation. Another example, https://bugs.ruby-lang.org/issues/20282 may be solved by this more generalized solution. We are tracking this request downstream here: https://github.com/trailofbits/ruzzy/issues/9 # Discussion Fuzz testing is another tool in a testers toolbelt. It is an increasingly common way to improve software's robustness. Go has it built in to the standard library, Python has Atheris, Java has Jazzer, JavaScript has Jazzer.js, etc. OSS-Fuzz has helped identify and fix over 10,000 vulnerabilities and 36,000 bugs [using fuzzing](https://google.github.io/oss-fuzz/#trophies). Ruby deserves a good fuzzer, and improving coverage gathering would help achieve that goal. The `Coverage` module, `TracePoint` module, and `rb_add_event_hook` function seem like they could fulfill this goal. However, after deeper investigation, none of them fit the exact requirements for this use-case. # See also - https://bugs.ruby-lang.org/issues/20282 - https://github.com/google/atheris - https://security.googleblog.com/2020/12/how-atheris-python-fuzzer-works.html - https://github.com/CodeIntelligenceTesting/jazzer/ - https://www.code-intelligence.com/blog/java-fuzzing-with-jazzer - https://go.dev/doc/security/fuzz/ -- https://bugs.ruby-lang.org/

2 9

[ruby-core:116456] [Ruby master Feature#20215] Introduce `IO#readable?`
by ioquatix (Samuel Williams) 19 Mar '26

19 Mar '26

Issue #20215 has been reported by ioquatix (Samuel Williams). ---------------------------------------- Feature #20215: Introduce `IO#readable?` https://bugs.ruby-lang.org/issues/20215 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- There are some cases where, as an optimisation, it's useful to know whether more data is potentially available. We already have `IO#eof?` but the problem with using `IO#eof?` is that it can block indefinitely for sockets. Therefore, code which uses `IO#eof?` to determine if there is potentially more data, may hang. ```ruby def make_request(path = "/") client = connect_remote_host # HTTP/1.0 request: client.write("GET #{path} HTTP/1.0\r\n\r\n") # Read response client.gets("\r\n") # => "HTTP/1.0 200 OK\r\n" # Assuming connection close, there are two things the server can do: # 1. peer.close # 2. peer.write(...); peer.close if client.eof? # <--- Can hang here! puts "Connection closed" # Avoid yielding as we know there definitely won't be any data. else puts "Connection open, data may be available..." # There might be data available, so yield. yield(client) end ensure client&.close end make_request do |client| puts client.read # <--- Prefer to wait here. end ``` The proposed `IO#readable?` is similar to `IO#eof?` but rather than blocking, would simply return false. The expectation is the user will subsequently call `read` which may then wait. The proposed implementation would look something like this: ```ruby class IO def readable? !!self.closed? end end class BasicSocket # Is it likely that the socket is still connected? # May return false positive, but won't return false negative. def readable? return false unless super # If we can wait for the socket to become readable, we know that the socket may still be open. result = self.recv_nonblock(1, MSG_PEEK, exception: false) # No data was available - newer Ruby can return nil instead of empty string: return false if result.nil? # Either there was some data available, or we can wait to see if there is data avaialble. return !result.empty? || result == :wait_readable rescue Errno::ECONNRESET # This might be thrown by recv_nonblock. return false end end ``` For `IO` itself, when there is buffered data, `readable?` would also return true immediately, similar to `eof?`. This is not shown in the above implementation as I'm not sure if there is any Ruby method which exposes "there is buffered data". -- https://bugs.ruby-lang.org/

8 18

[ruby-core:111678] [Ruby master Feature#19315] Lazy substrings in CRuby
by Eregon (Benoit Daloze) 17 Mar '26

17 Mar '26

Issue #19315 has been reported by Eregon (Benoit Daloze). ---------------------------------------- Feature #19315: Lazy substrings in CRuby https://bugs.ruby-lang.org/issues/19315 * Author: Eregon (Benoit Daloze) * Status: Open * Priority: Normal ---------------------------------------- CRuby should implement lazy substrings, i.e., "abcdef"[1..3] must not copy bytes. Currently CRuby only reuse the char* if the substring is until the end of the buffer. But it should also work wherever the substring starts and ends. Yes, it means RSTRING_PTR() might need to allocate to \0-terminate, so be it, it's worth it. There is already code for this (`SHARABLE_MIDDLE_SUBSTRING`), but it's disabled by default and `RSTRING_PTR()` needs to be changed to deal with this. It seems a good idea to introduce a variant of `RSTRING_PTR` which doesn't guarantee \0-termination, so such callers can then use the existing bytes always without copy. There are countless workarounds for this missing optimization, all not worth and all less readable: * https://bugs.ruby-lang.org/issues/19314 * https://github.com/ruby/net-protocol/pull/14 * Manual lazy substrings which track string + index + length * More but I don't remember all now, feel free to comment or link more urls/tickets. -- https://bugs.ruby-lang.org/

7 11

[ruby-core:116589] [Ruby master Misc#20238] Use prism for mk_builtin_loader.rb
by kddnewton (Kevin Newton) 13 Mar '26

13 Mar '26

Issue #20238 has been reported by kddnewton (Kevin Newton). ---------------------------------------- Misc #20238: Use prism for mk_builtin_loader.rb https://bugs.ruby-lang.org/issues/20238 * Author: kddnewton (Kevin Newton) * Status: Open * Priority: Normal ---------------------------------------- I would like to propose that we use prism for mk_builtin_loader.rb. Right now the Ruby syntax that you can use in builtin classes is restricted to the base Ruby version (2.7). This means you can't use a lot of the nicer syntax that Ruby has shipped in the last couple of years. If we switch to using prism to parse the builtin files instead of using ripper, then we can always use the latest version of Ruby syntax. A pull request for this is here: https://github.com/kddnewton/ruby/pull/65. The approach for the PR is taken from how RJIT bindgen works. -- https://bugs.ruby-lang.org/

6 22

[ruby-core:117027] [Ruby master Bug#20319] Singleton class is being frozen lazily in some cases
by andrykonchin (Andrew Konchin) 24 Feb '26

24 Feb '26

Issue #20319 has been reported by andrykonchin (Andrew Konchin). ---------------------------------------- Bug #20319: Singleton class is being frozen lazily in some cases https://bugs.ruby-lang.org/issues/20319 * Author: andrykonchin (Andrew Konchin) * Status: Open * ruby -v: 3.2.2 * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- I've noticed suspicious behaviour (it doesn't affect anything in practice for me though) when an object becomes frozen only its own singleton class becomes frozen immediately. A singleton class of the immediate singleton class becomes frozen lazily after `#singleton_class` method call: ```ruby o = Object.new klass = o.singleton_class.singleton_class o.freeze puts klass.frozen? # false <== here we expect true puts o.singleton_class.singleton_class.frozen? # true puts klass.frozen? # true ``` I would expect all created singleton classes in an object singleton classes chain to become frozen immediately. -- https://bugs.ruby-lang.org/

5 8

[ruby-core:115196] [Ruby master Feature#19979] Allow methods to declare that they don't accept a block via `&nil`
by ufuk (Ufuk Kayserilioglu) 15 Feb '26

15 Feb '26

Issue #19979 has been reported by ufuk (Ufuk Kayserilioglu). ---------------------------------------- Feature #19979: Allow methods to declare that they don't accept a block via `&nil` https://bugs.ruby-lang.org/issues/19979 * Author: ufuk (Ufuk Kayserilioglu) * Status: Open * Priority: Normal ---------------------------------------- ## Abstract This feature proposes new syntax to allow methods to explicitly declare that they don't accept blocks, and makes passing of a block to such methods an error. ## Background In #15554, it was proposed to automatically detect methods that do not use the block passed to them, and to error if a block was passed to such methods. As far as I can tell, it was later on closed since #10499 solved a large part of the problem. That proposal has, as part of the dev meeting discussion, a proposal from @matz to allow methods to use `&nil` to explicitly declare that they don't accept a block. At the time, the proposal was trying to solve a bigger problem, so this sub-proposal was never considered seriously. However, notes in the proposal say: > It is explicit, but it is tough to add this `&nil` parameter declaration to all of methods (do you want to add it to `def []=(i, e, &nil)`?). (I agree `&nil` is valuable on some situations) This proposal extracts that sub-proposal to make this a new language feature. ## Proposal In Ruby, it is always valid for the caller to pass a block to a method call, even if the callee is not expecting a block to be passed. This leads to subtle user errors, where the author of some code assumes a method call uses a block, but the block passed to the method call is silently ignored. The proposal is to introduce `&nil` at method declaration sites to mean "This method does not accept a block". This is symmetric to the ability to pass `&nil` at call sites to mean "I am not passing a block to this method call", which is sometimes useful when making `super` calls (since blocks are always implicitly passed). Explicitly, the proposal is to make the following behaviour be a part of Ruby: ```ruby def find(item = nil, &nil) # some implementation that doesn't call `yield` or `block_given?` end find { |i| i == 42 } # => ArgumentError: passing block to the method `find' that does not accept a block. ``` ## Implementation I assume the implementation would be a grammar change to make `&nil` valid at method declaration sites, as well as raising an `ArgumentError` for methods that are called with a block but are declared with `&nil`. ## Evaluation Since I don't have an implementation, I can't make a proper evaluation of the feature proposal. However, I would expect the language changes to be minimal with no runtime costs for methods that don't use the `&nil` syntax. ## Discussion This proposal has much smaller scope than #15554 so that the Ruby language can start giving library authors the ability to explicitly mark their methods as not accepting a block. This is fully backward compatible, since it is an opt-in behaviour and not an opt-out one. Future directions after this feature proposal could be a way to signal to the VM that any method in a file that doesn't explicitly use `yield`/`block_given?` or explicitly declared a block parameter should be treated as not accepting a block. This can be done via some kind of pragma similar to `frozen_string_literal`, or through other means. However, such future directions are beyond the scope of this proposal. ## Summary Adding the ability for methods to declare that they don't accept a block will make writing code against such methods safer and more resilient, and will prevent silently ignored behaviour that is often hard to catch or troubleshoot. -- https://bugs.ruby-lang.org/

10 25

[ruby-core:116028] [Ruby master Feature#20152] mkmf / extconf: Add a proper way to not compile the extension
by byroot (Jean Boussier) 06 Feb '26

06 Feb '26

Issue #20152 has been reported by byroot (Jean Boussier). ---------------------------------------- Feature #20152: mkmf / extconf: Add a proper way to not compile the extension https://bugs.ruby-lang.org/issues/20152 * Author: byroot (Jean Boussier) * Status: Open * Priority: Normal ---------------------------------------- ### Context There are various gems that ship with a native extension as a way to speedup part of the gem, but also ship with a pure Ruby version of these methods as a fallback. So they only want to compile the extension if the platform supports it, and if not, just fallback to the slightly slower Ruby version. Right now users rely on one of two hacks to do this. Either they create an empty Makefile, but then still depend on `make` being available, or publish platform specific packages without any extension in them. Examples: - [`bootsnap` skip compilation if not on MRI or TruffleRuby](https://github.com/Shopify/bootsnap/blob/070151f1305f23102365d… - [`erb` has an extension for MRI but then need to publish a `java` version of the gem that doesn't actually contain Java code, just to skip compilation on JRuby](https://github.com/ruby/erb/issues/52) - [`hiredis-client` skips the compilation for Windows and non-MRI rubies](https://github.com/redis-rb/redis-client/blob/1ab081c1d0e47df5d55e0… ### Feature It would be very useful to have some proper first class API to skip compiling the extension. Something like: ```ruby require "mkmf" if RUBY_ENGINE != "ruby" || RUBY_PLATFORM.match?(/mswin/) skip_compilation else # ... end ``` cc @k0kubun @headius -- https://bugs.ruby-lang.org/

10 21

[ruby-core:116935] [Ruby master Bug#18743] Enumerator#next / peek re-use each others stacktraces
by nagachika (Tomoyuki Chikanaga) 22 Jan '26

22 Jan '26

Issue #18743 has been updated by nagachika (Tomoyuki Chikanaga). Backport changed from 3.0: REQUIRED, 3.1: REQUIRED, 3.2: REQUIRED to 3.0: REQUIRED, 3.1: REQUIRED, 3.2: DONE ruby_3_2 5e4606423da96c2e26b00981c22bddfce0d970bf merged revision(s) f15123c34ce80f3928612befe2a9aaf4c9d27fda. ---------------------------------------- Bug #18743: Enumerator#next / peek re-use each others stacktraces https://bugs.ruby-lang.org/issues/18743#change-106970 * Author: sos4nt (Stefan Schüßler) * Status: Closed * Assignee: ko1 (Koichi Sasada) * Backport: 3.0: REQUIRED, 3.1: REQUIRED, 3.2: DONE ---------------------------------------- I encountered an odd behavior. If I rescue the `StopIteration` exception from `peek` and call `next` afterwards: (or vice-versa) ```ruby # enum.rb # 1 # 2 enum = [].each # 3 enum.peek rescue nil # 4 enum.next # 5 ``` it will show the stacktrace from the rescued `peek` call: ``` $ ruby enum.rb enum.rb:4:in `peek': iteration reached an end (StopIteration) from enum.rb:4:in `<main>' ``` Whereas the error should refer to `next` on line number 5. The same happens when calling `peek` after `next` or when having muliple `peek` / `next` calls: ```ruby # enum.rb # 1 # 2 enum = [].each # 3 enum.peek rescue nil # 4 enum.next rescue nil # 5 enum.peek rescue nil # 6 puts "line #{__LINE__}" # 7 enum.next # 8 ``` The stacktrace from the first (rescued) `peek` or `next` call will be shown which doesn't reflect the actual error location: ``` $ ruby enum.rb line 7 enum.rb:4:in `peek': iteration reached an end (StopIteration) from enum.rb:4:in `<main>' ``` This is very confusing when debugging code. ---Files-------------------------------- 01-Recreate-stacktrace-enumerator.patch (1.29 KB) -- https://bugs.ruby-lang.org/

2 1

[ruby-core:112045] [Ruby master Bug#19378] Windows: Use less syscalls for faster require of big gems
by aidog (Andi Idogawa) 12 Jan '26

12 Jan '26

Issue #19378 has been reported by aidog (Andi Idogawa). ---------------------------------------- Bug #19378: Windows: Use less syscalls for faster require of big gems https://bugs.ruby-lang.org/issues/19378 * Author: aidog (Andi Idogawa) * Status: Open * Priority: Normal * ruby -v: 3.2.0 * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- Hello 🙂 ## Problem require is slow on windows for big gems. (example: require 'gtk3'=> 3 seconds+). This is a problem for people who want to make cross platform GUI apps with ruby. ## Possible Reason As touched on in [#15797](https://bugs.ruby-lang.org/issues/15797) it seems like require uses realpath, which is emulated on windows. It checks every parent directory. The same syscalls run many times. ## Testfile C:\tmp\speedtest\testrequire.rb: ``` ruby require __dir__ + "/helloworld1.rb" require __dir__ + "/helloworld2.rb" ``` ``` shell ruby --disable-gems C:\tmp\speedtest\testrequire.rb ``` ### Syscalls per File/Directory: 1. CreateFile 2. QueryInformationVolume 3. QueryIdInformation 4. QueryAllInformationFile 5. QueryNameInformationFile 6. QueryNameInformationFile 7. QueryNormalizedNameInformationFile 8. CloseFile ### Files/Directories checked 1. C:\tmp 2. C:\tmp\speedtest 3. C:\tmp\speedtest\helloworld1.rb 4. C:\tmp 5. C:\tmp\speedtest 6. C:\tmp\speedtest\helloworld2.rb For two required files Ruby had to do 8*6 = **48** syscalls. The syscalls orginate from rb_w32_reparse_symlink_p / lstat Rubygems live in subfolders with 9+ parts: "C:\Ruby32-x64\lib\ruby\gems\3.2.0\gems\glib2-4.0.8\lib\glib2\variant.rb" Each file takes 8 * 9 = **72**+ calls. For variant.rb it is **80** calls. The result for the syscalls don't change in such a short time, so it should be possible to cache it. With require_relative it's twice as many calls. ## Other testcases Same result: ``` ruby File.realpath __dir__ + "/helloworld1.rb" File.realpath __dir__ + "/helloworld2.rb" ``` ``` ruby File.stat __dir__ + "/helloworld1.rb" File.stat __dir__ + "/helloworld2.rb" ``` It does not happen in $LOAD_PATH.resolve_feature_path(__dir__ + "/helloworld1.rb") ## Request Would it be possible to cache the stat calls when using require? I tried to implement a cache inside the ruby source code, but failed. If not, is there now a way to combine ruby files into one? I previously talked about require here: [YJIT: Windows support lacking.](https://bugs.ruby-lang.org/issues/19325#note-11) ## How to reproduce Ruby versions: At least 3.0+, most likely older ones too. Tested using Ruby Installer 3.1 and 3.2. [Procmon Software by Sysinternals](https://learn.microsoft.com/en-us/sysinternals/downloads/proc… -- https://bugs.ruby-lang.org/

6 7

[ruby-core:117003] [Ruby master Bug#20314] Simultaneous Timeout expires may raise an exception after the block
by mame (Yusuke Endoh) 11 Dec '25

11 Dec '25

Issue #20314 has been reported by mame (Yusuke Endoh). ---------------------------------------- Bug #20314: Simultaneous Timeout expires may raise an exception after the block https://bugs.ruby-lang.org/issues/20314 * Author: mame (Yusuke Endoh) * Status: Open * Backport: 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- Launchable reports `TestTimeout#test_nested_timeout` as a flaky test, and I reproduced it as follows. ```ruby require "timeout" class A < Exception end class B < Exception end begin Timeout.timeout(0.1, A) do Timeout.timeout(0.1, B) do nil while true end end rescue A, B p $! #=> #<A: execution expired> # Exception B is raised after the above call returns #=> test.rb:16:in `p': execution expired (B) p :end # not reach end ``` This is because the timer thread performs two consecutive `Thread#raise` to the target thread. I have discussed this with @ko1 and have come up with three solutions. ### Solution 1 When multiple nested Timeouts expire simultaneously, raise an exception for the outer-most Timeout and let the inner Timeouts expire without throwing an exception. In the above example, it would only raise A. The problem with this approach is that if you are rescuing A in the inner block, it may never ends: ```ruby Timeout.timeout(0.1, A) do Timeout.timeout(0.1, B) do begin sleep rescue A sleep # The exception A is caught. The inner Timeout is already expired, so the code (may) never end. end end end ``` Note that, if A and B did not occur at the same time, it would raise B. This is a race condition. ### Solution 2 When multiple nested Timeouts expire simultaneously, raise an exception for the inner-most Timeout and let the outer Timeouts wait until the inner-most Timeout returns. In the above example, it would raise either A or B, not both. The problem with this approach is that if you are rescuing B in the inner block, it never ends: ```ruby Timeout.timeout(0.1, A) do Timeout.timeout(0.1, B) do begin sleep rescue B sleep # The outer Timeout waits for the inner timeout, and the inner Timeout never return. So this code never ends. end end end ``` ### Solution 3 Make thread interrupt queue one length. If the target thread has already been `Thread#raise(A)`, the new `Thread#raise(B)` blocks until the target thread processes A. Since there will be no more simultaneous Thread#raise, there will be no more exceptions after the end of the block. The timeout timer thread should be changed in consideration that `Thread#raise` may block. -- https://bugs.ruby-lang.org/

3 5