March 2023 - ruby-core - ml.ruby-lang.org

[ruby-core:112584] [Ruby master Feature#19465] [PATCH] reuse open(2) from rb_file_load_ok on POSIX-like system
by normalperson (Eric Wong) 08 Mar '23

08 Mar '23

Issue #19465 has been reported by normalperson (Eric Wong). ---------------------------------------- Feature #19465: [PATCH] reuse open(2) from rb_file_load_ok on POSIX-like system https://bugs.ruby-lang.org/issues/19465 * Author: normalperson (Eric Wong) * Status: Open * Priority: Normal ---------------------------------------- ``` When loading Ruby source files, we can save the result of successful opens as open(2)/openat(2) are a fairly expensive syscalls. This also avoids a time-of-check-to-time-of-use (TOCTTOU) problem. This reduces open(2) syscalls during `require'; but should be most apparent when users have a small $LOAD_PATH. Users with large $LOAD_PATH will benefit less since there'll be more open(2) failures due to ENOENT. With `strace -c -e openat ruby -e exit' under Linux, this results in a ~14% reduction of openat(2) syscalls (glibc uses openat(2) to implement open(2)). % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 0.00 0.000000 0 296 110 openat 0.00 0.000000 0 254 110 openat Additionally, the introduction of `struct ruby_file_load_state' may make future optimizations more apparent. This change cannot benefit binary (.so) loading since the dlopen(3) API requires a filename and I'm not aware of an alternative that takes a pre-existing FD. In typical situations, Ruby source files outnumber the mount of .so files. I've only tested this lightly on small apps since I don't have large codebases to test on. However, I think organizing various on-stack variables into `struct ruby_file_load_state' can be beneficial if we end up using io-uring on Linux. ``` ---Files-------------------------------- 0001-reuse-open-2-from-rb_file_load_ok-on-POSIX-like-syst.patch (15.2 KB) -- https://bugs.ruby-lang.org/

7 8

[ruby-core:111812] [Ruby master Bug#19340] Ruby master 'make install' not installing rbs gem
by MSP-Greg (Greg L) 08 Mar '23

08 Mar '23

Issue #19340 has been reported by MSP-Greg (Greg L). ---------------------------------------- Bug #19340: Ruby master 'make install' not installing rbs gem https://bugs.ruby-lang.org/issues/19340 * Author: MSP-Greg (Greg L) * Status: Open * Priority: Normal * ruby -v: ruby 3.3.0dev (2023-01-14T11:30:19Z master 1ddeb7473d) * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- Last three daily builds of ruby-dev-builder have not included the rbs gem. See https://github.com/ruby/ruby-dev-builder/actions/runs/3919887598/jobs/67011… ruby/ruby PR https://github.com/ruby/ruby/pull/7114 ruby/ruby-dev-builder PR https://github.com/ruby/ruby-dev-builder/pull/2 checks all bin files work Added a patch to ruby-loco for it, so its builds are ok. -- https://bugs.ruby-lang.org/

3 7

[ruby-core:112735] [Ruby master Bug#16694] JIT vs hardened GCC with PCH
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #16694 has been updated by k0kubun (Takashi Kokubun). Sorry for not fixing this for a while, but I replaced the implementation in [Feature #19420] and it should indeed remove this problem. Closing. ---------------------------------------- Bug #16694: JIT vs hardened GCC with PCH https://bugs.ruby-lang.org/issues/16694#change-102191 * Author: vo.x (Vit Ondruch) * Status: Assigned * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * ruby -v: ruby 2.6.3p62 (2019-04-16 revision 67580) [x86_64-linux] * Backport: 2.5: UNKNOWN, 2.6: UNKNOWN, 2.7: UNKNOWN ---------------------------------------- Preparing Ruby package for RHEL 8, I observe the following error: ~~~ $ cd /builddir/build/BUILD/ruby-2.6.3/ $ make test-all TESTS=test/ruby/test_rubyvm_mjit.rb Run options: "--ruby=./miniruby -I./lib -I. -I.ext/common ./tool/runruby.rb --extout=.ext -- --disable-gems" --excludes-dir=./test/excludes --name=!/memory_leak/ # Running tests: [1/4] TestRubyVMMJIT#test_pause = 0.24 s 1) Failure: TestRubyVMMJIT#test_pause [/builddir/build/BUILD/ruby-2.6.3/test/ruby/test_rubyvm_mjit.rb:32]: unexpected stdout: ''' truefalsefalse``` stderr: ''' /tmp/_ruby_mjit_p712u0.c:1:37: error: one or more PCH files were found, but they were invalid #include "/tmp/_ruby_mjit_hp712u0.h" ^ compilation terminated due to -Wfatal-errors. /tmp/_ruby_mjit_p712u1.c:1:37: error: one or more PCH files were found, but they were invalid #include "/tmp/_ruby_mjit_hp712u0.h" ^ compilation terminated due to -Wfatal-errors. /tmp/_ruby_mjit_p712u2.c:1:37: error: one or more PCH files were found, but they were invalid #include "/tmp/_ruby_mjit_hp712u0.h" ^ compilation terminated due to -Wfatal-errors. /tmp/_ruby_mjit_p712u3.c:1:37: error: one or more PCH files were found, but they were invalid #include "/tmp/_ruby_mjit_hp712u0.h" ^ compilation terminated due to -Wfatal-errors. /tmp/_ruby_mjit_p712u4.c:1:37: error: one or more PCH files were found, but they were invalid #include "/tmp/_ruby_mjit_hp712u0.h" ^ compilation terminated due to -Wfatal-errors. Successful MJIT finish ```. <5> expected but was <0>. Finished tests in 0.937667s, 4.2659 tests/s, 24.5290 assertions/s. 4 tests, 23 assertions, 1 failures, 0 errors, 0 skips ruby -v: ruby 2.6.3p62 (2019-04-16 revision 67580) [x86_64-linux] make: *** [uncommon.mk:761: yes-test-all] Error 1 ~~~ As it turns out, this is because GCC in RHEL is fully hardened. Unfortunately, due to GCC design, when GCC is fully hardened, it cannot properly handle PCH due to memory address relocation. Moreover, PCH are also security risk, so it seems they are going to be disabled entirely on RHEL. Now I wonder what is the impact on Ruby JIT. I worry that with disabled PCH, the Ruby performance with JIT will be even worser without JIT. May be it is not good idea to use GCC for JIT. What are your thoughts? The original ticket with all the details is here [1]. [1]: https://bugzilla.redhat.com/show_bug.cgi?id=1721553 -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112734] [Ruby master Bug#18142] Segmentation fault with Ruby 3.0.2
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #18142 has been updated by k0kubun (Takashi Kokubun). Status changed from Assigned to Closed We replaced the implementation in [Feature #19420] and we don't use `CRITICAL_SECTION_START` anymore. Closing. ---------------------------------------- Bug #18142: Segmentation fault with Ruby 3.0.2 https://bugs.ruby-lang.org/issues/18142#change-102190 * Author: hsbt (Hiroshi SHIBATA) * Status: Closed * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * Backport: 2.6: UNKNOWN, 2.7: UNKNOWN, 3.0: UNKNOWN ---------------------------------------- This may be similar with https://bugs.ruby-lang.org/issues/17584 I got the following error with Ruby 3.0.2+jit and fcgid gem, tDiary-5.1.6. ``` [BUG] Segmentation fault at 0x0000000000000027 ruby 3.0.2p107 (2021-07-07 revision 0db68f0233) [x86_64-linux] -- Machine register context ------------------------------------------------ RIP: 0x00007f2f63217468 RBP: 0x0000561b53017178 RSP: 0x00007f2f5f444d40 RAX: 0x0000000000000027 RBX: 0x0000000000000000 RCX: 0x0000000000000000 RDX: 0x0000561b53083b20 RDI: 0x0003aaa100140005 RSI: 0x0000561b519c2fa8 R8: 0x0000000000000001 R9: 0x000000000000007c R10: 0x00007f2f580008d0 R11: 0x00007f2f58000080 R12: 0x00007f2f63393e00 R13: 0x0000000000000001 R14: 0x0000000000000028 R15: 0x000000000000009a EFL: 0x0000000000010246 -- C level backtrace information ------------------------------------------- /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(rb_print_backtrace+0x11) [0x7f2f63375d73] vm_dump.c:758 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(rb_vm_bugreport) vm_dump.c:998 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(rb_bug_for_fatal_signal+0xf4) [0x7f2f63180e04] error.c:786 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(sigsegv+0x4d) [0x7f2f632ccc4d] signal.c:960 /lib/x86_64-linux-gnu/libc.so.6(0x7f2f62efe210) [0x7f2f62efe210] /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(rb_mjit_inlinable_iseq+0x38) [0x7f2f63217468] mjit_compile.c:451 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(set_compiling_iseqs+0x64) [0x7f2f631effae] mjit_worker.c:758 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(set_compiling_iseqs) mjit_worker.c:739 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(convert_unit_to_func+0x6c5) [0x7f2f631f2b35] mjit_worker.c:1199 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(CRITICAL_SECTION_START+0x0) [0x7f2f631f3469] mjit_worker.c:1488 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(mjit_worker) mjit_worker.c:1491 /home/hsbt/.rbenv/versions/3.0.2/lib/libruby.so.3.0(mjit_worker+0x1e) [0x7f2f6330d78e] thread_pthread.c:1942 /lib/x86_64-linux-gnu/libpthread.so.0(start_thread+0xd9) [0x7f2f62e82609] /lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x7f2f62fda293] ``` Full of log is here: https://gist.github.com/hsbt/5a3ce854820f8ab726a7d017dda2e7dd -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112733] [Ruby master Bug#18277] buffer error (Zlib::BufError) in Zlib::Deflate#deflate when using MJIT
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #18277 has been updated by k0kubun (Takashi Kokubun). Status changed from Open to Closed Closing as we replaced the implementation in [Feature #19420] and I believe this doesn't happen anymore. ---------------------------------------- Bug #18277: buffer error (Zlib::BufError) in Zlib::Deflate#deflate when using MJIT https://bugs.ruby-lang.org/issues/18277#change-102189 * Author: Eregon (Benoit Daloze) * Status: Closed * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * ruby -v: ruby 3.1.0dev (2021-10-23T04:38:40Z master cda8bc3657) +JIT [x86_64-linux] * Backport: 2.6: UNKNOWN, 2.7: UNKNOWN, 3.0: UNKNOWN ---------------------------------------- To repro: ``` $ git clone https://github.com/Shopify/yjit-bench.git $ cd yjit-bench $ ruby --jit -I./harness benchmarks/hexapdf/benchmark.rb ... Bundle complete! 1 Gemfile dependency, 4 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. /home/eregon/prefix/ruby-master/lib/ruby/gems/3.1.0/gems/hexapdf-0.16.0/lib/hexapdf/filter/flate_decode.rb:94:in `deflate': buffer error (Zlib::BufError) from /home/eregon/prefix/ruby-master/lib/ruby/gems/3.1.0/gems/hexapdf-0.16.0/lib/hexapdf/filter/flate_decode.rb:94:in `block in encoder' ``` This fails every time with MJIT, and it does not fail without MJIT or with YJIT (on ruby master @ cda8bc3657). It fails on master MJIT: `ruby 3.1.0dev (2021-10-23T04:38:40Z master cda8bc3657) +JIT [x86_64-linux]` It works with 3.0.2 MJIT: `ruby 3.0.2p107 (2021-07-07 revision 0db68f0233) +JIT [x86_64-linux]`. -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112732] [Ruby master Bug#17995] Slow down when mjit and Ractor are being used at same time
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #17995 has been updated by k0kubun (Takashi Kokubun). Status changed from Open to Closed Closing this since I replaced the implementation in [Feature #19420]. It doesn't mean that it works well with Ractor, but the current issue with Ractor should be reported separately since it's a completely different symptom. ---------------------------------------- Bug #17995: Slow down when mjit and Ractor are being used at same time https://bugs.ruby-lang.org/issues/17995#change-102188 * Author: nekoyama32767 (Jinsong Yu) * Status: Closed * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * ruby -v: Ruby 3.0.1p64 (2021-04-05 revison 0fb782ee38)[x86-64-linux] ruby 3.0.1p64 (2021-04-05 revision 0fb782ee38) [x64-mingw32] * Backport: 2.6: UNKNOWN, 2.7: UNKNOWN, 3.0: UNKNOWN ---------------------------------------- When using --jit and Ractor at same time, benchmark would be slow down with recursion function such like Tarai function an Fibonacci function. The slow down is confirmed under both gcc(linux) and mingw64(windows MSYS2). Test environment: Cpu:Ryzen9 5900HS(a)3.3Ghz 8core/16thread Memory:32GB@3200Mhz OS:Ubuntu 21.04/Windows 10 Because of this cpu has 8 physic core,the parallel thread number is set to 8 Slow down is also confirmed with using only ractor (without sequence running). When runing 'par' before 'seq' and using --mjit,'seq' is more slower than runing 'seq' berfore 'par' Tarai function ```ruby def tarai(x, y, z) = x <= y ? y : tarai(tarai(x-1, y, z), tarai(y-1, z, x), tarai(z-1, x, y)) require 'benchmark' Benchmark.bm do |x| # sequential version x.report('seq'){ 8.times{ tarai(14, 7, 0) } } # parallel version x.report('par'){ 8.times.map do Ractor.new { tarai(14, 7, 0) } end.each(&:take) } end ``` Fibonacci function ```ruby def fib(n) if n==1 then return 1 end if n==2 then return 1 end fib(n-1)+fib(n-2) end require 'benchmark' Benchmark.bm do |x| # sequential version x.report('fib:seq'){ 8.times{ fib(40) } } # parallel version x.report('fib:par '){ 8.times.map do Ractor.new {fib(40) } end.each(&:take) } end ``` -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112731] [Ruby master Bug#18808] Cannot compile ruby 3.1.2 on powerpc64le-linux without disabling the jit features
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #18808 has been updated by k0kubun (Takashi Kokubun). Status changed from Assigned to Closed I replaced the build process in [Feature #19420], and this issue seems irrelevant to today's build system. Closing. ---------------------------------------- Bug #18808: Cannot compile ruby 3.1.2 on powerpc64le-linux without disabling the jit features https://bugs.ruby-lang.org/issues/18808#change-102187 * Author: npn (John Davis) * Status: Closed * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN ---------------------------------------- The system I am trying to compile on is a ppc64el system running RedHat 7 (3.10.0-1160.62.1.el7.ppc64le). I can successfully compile on a x86_64 system running the same version RedHat 7 (3.10.0-1160.62.1.el7.x86_64) When I configure with the following, make completes fine, but if I remove the `--disable-jit-support` it fails with the following error. ./configure --enable-shared --enable-load-relative --disable-install-doc --prefix=$RUBY_PREFIX --exec-prefix=$RUBY_PREFIX/rh_ppc --disable-jit-support building rb_mjit_header.h rb_mjit_header.h updated building .ext/include/powerpc64le-linux/rb_mjit_min_header-3.1.2.h error in final header file: In file included from /tmp/20220525-12786-q2ndz2.c:1:0: /tmp/20220525-12786-vf3xbh.h:16627:1: error: multiple storage classes in declaration specifiers __attribute__ ((__visibility__("default"))) extern ^ compilation terminated due to -Wfatal-errors. make: *** [.ext/include/powerpc64le-linux/rb_mjit_min_header-3.1.2.h] Error 1 ---Files-------------------------------- config.log (1.45 MB) rb_mjit_min_header-3.2.0.h (1000 KB) rb_mjit_header.h (1010 KB) rb_mjit_header.h (1010 KB) config.log (1.37 MB) -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112730] [Ruby master Bug#18058] 3.1.0-dev with MJIT enabled Zlib::BufError during `gem install`
by k0kubun (Takashi Kokubun) 07 Mar '23

07 Mar '23

Issue #18058 has been updated by k0kubun (Takashi Kokubun). Status changed from Assigned to Closed I replaced the entire implementation in [Feature #19420], and I haven't seen this issue with today's implementation. ---------------------------------------- Bug #18058: 3.1.0-dev with MJIT enabled Zlib::BufError during `gem install` https://bugs.ruby-lang.org/issues/18058#change-102186 * Author: byroot (Jean Boussier) * Status: Closed * Priority: Normal * Assignee: k0kubun (Takashi Kokubun) * ruby -v: ruby 3.1.0dev (2021-08-01T00:54:36Z master 605421f4eb) +JIT [x86_64-linux] * Backport: 2.6: UNKNOWN, 2.7: UNKNOWN, 3.0: UNKNOWN ---------------------------------------- It doesn't always happen (maybe 5-10% of the cases), but since I added MJIT to our CI builds I've been seeing this error a lot. I was able to reproduce it in `docker run -it rubylang/ruby:master-nightly-bionic` after 15 or so tries: ``` # ruby -v ruby 3.1.0dev (2021-08-01T00:54:36Z master 605421f4eb) [x86_64-linux] # gem uninstall bundler -v 2.2.21; env RUBYOPT="--enable-jit --jit-max-cache=10000 --jit-min-calls=10 $RUBYOPT" gem install --no-document --user-install bundler -v 2.2.21 Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Exception while verifying /usr/local/lib/ruby/gems/3.1.0/cache/bundler-2.2.21.gem ERROR: While executing gem ... (Zlib::BufError) buffer error ``` e.g. ``` $ docker run -it rubylang/ruby:master-nightly-bionic bash -c 'while env RUBYOPT="--enable-jit --jit-max-cache=10000 --jit-min-calls=10 $RUBYOPT" gem install --no-document --user-install bundler -v 2.2.21; do gem uninstall bundler -v 2.2.21; done' Fetching bundler-2.2.21.gem WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Successfully installed bundler-2.2.21 1 gem installed Successfully uninstalled bundler-2.2.21 WARNING: You don't have /root/.local/share/gem/ruby/3.1.0/bin in your PATH, gem executables will not run. Exception while verifying /usr/local/lib/ruby/gems/3.1.0/cache/bundler-2.2.21.gem ERROR: While executing gem ... (Zlib::BufError) buffer error ``` -- https://bugs.ruby-lang.org/

1 0

[ruby-core:112560] [Ruby master Bug#19462] MJIT not enabled with universal macOS x86_64 + arm64 build
by benhamilton (Ben Hamilton) 07 Mar '23

07 Mar '23

Issue #19462 has been reported by benhamilton (Ben Hamilton). ---------------------------------------- Bug #19462: MJIT not enabled with universal macOS x86_64 + arm64 build https://bugs.ruby-lang.org/issues/19462 * Author: benhamilton (Ben Hamilton) * Status: Open * Priority: Normal * ruby -v: ruby 3.3.0dev (2023-02-21T21:59:54Z master ae9e1aee59) [universal.x86_64-darwin22] * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- I'm trying to build a universal macOS x86_64 + arm64 ruby from upstream @ ae9e1aee59b0db1e61aa0473556165f9fd719cde on x86_64 macOS Ventura 13.2, Xcode 14.2, Apple clang version 14.0.0 (clang-1400.0.29.202). When I run `autoconf && ./configure --with-arch=x86_64,arm64`, MJIT support is `yes` and YJIT support is `no` (I assume YJIT is disabled because I'm building for arm64): ``` Configuration summary for ruby version 3.3.0 * Installation prefix: /usr/local * exec prefix: ${prefix} * arch: universal-darwin22 * site arch: ${arch} * RUBY_BASE_NAME: ruby * ruby lib prefix: ${libdir}/${RUBY_BASE_NAME} * site libraries path: ${rubylibprefix}/${sitearch} * vendor path: ${rubylibprefix}/vendor_ruby * target OS: darwin22 * compiler: clang * with thread: pthread * with coroutine: universal * enable shared libs: no * dynamic library ext: bundle * CFLAGS: -fdeclspec ${optflags} ${debugflags} ${warnflags} * LDFLAGS: -L. -fstack-protector-strong * DLDFLAGS: -Wl,-multiply_defined,suppress * optflags: -O3 -fno-fast-math * debugflags: -ggdb3 * warnflags: -Wall -Wextra -Wextra-tokens \ -Wdeprecated-declarations -Wdivision-by-zero \ -Wdiv-by-zero -Wimplicit-function-declaration \ -Wimplicit-int -Wmisleading-indentation \ -Wpointer-arith -Wshorten-64-to-32 \ -Wwrite-strings -Wold-style-definition \ -Wmissing-noreturn -Wno-cast-function-type \ -Wno-constant-logical-operand -Wno-long-long \ -Wno-missing-field-initializers \ -Wno-overlength-strings -Wno-parentheses-equality \ -Wno-self-assign -Wno-tautological-compare \ -Wno-unused-parameter -Wno-unused-value \ -Wunused-variable -Wundef * strip command: strip -A -n * install doc: rdoc * MJIT support: yes * YJIT support: no * man page type: doc * BASERUBY -v: ruby 2.6.10p210 (2022-04-12 revision 67958) \ [universal.x86_64-darwin22] ``` However, when I compile with `make -j2`, I see that it's disabled: ``` % make -j2 BASERUBY = /usr/bin/ruby --disable=gems CC = clang LD = ld LDSHARED = clang -dynamiclib CFLAGS = -fdeclspec -O3 -fno-fast-math -ggdb3 -Wall -Wextra -Wextra-tokens -Wdeprecated-declarations -Wdivision-by-zero -Wdiv-by-zero -Wimplicit-function-declaration -Wimplicit-int -Wmisleading-indentation -Wpointer-arith -Wshorten-64-to-32 -Wwrite-strings -Wold-style-definition -Wmissing-noreturn -Wno-cast-function-type -Wno-constant-logical-operand -Wno-long-long -Wno-missing-field-initializers -Wno-overlength-strings -Wno-parentheses-equality -Wno-self-assign -Wno-tautological-compare -Wno-unused-parameter -Wno-unused-value -Wunused-variable -Wundef -pipe -arch x86_64 -arch arm64 XCFLAGS = -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fstack-protector-strong -fno-strict-overflow -fvisibility=hidden -DRUBY_EXPORT -fPIE -I. -I.ext/include/universal-darwin22 -I./include -I. -I./enc/unicode/15.0.0 CPPFLAGS = -D_XOPEN_SOURCE -D_DARWIN_C_SOURCE -D_DARWIN_UNLIMITED_SELECT -D_REENTRANT DLDFLAGS = -Wl,-multiply_defined,suppress -fstack-protector-strong -Wl,-pie -framework CoreFoundation -arch x86_64 -arch arm64 SOLIBS = -ldl -lobjc -lpthread LANG = en_US.UTF-8 LC_ALL = LC_CTYPE = MFLAGS = - --jobserver-fds=3,4 -j RUSTC = rustc YJIT_RUSTC_ARGS = --crate-name=yjit --crate-type=staticlib --edition=2021 -g -C lto=thin -C opt-level=3 -C overflow-checks=on '--out-dir=/Users/benhamilton/Developer/OpenSource/ruby/yjit/target/release/' ./yjit/src/lib.rs Apple clang version 14.0.0 (clang-1400.0.29.202) Target: x86_64-apple-darwin22.3.0 Thread model: posix InstalledDir: /Applications/Xcode_14.2.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin [snip] building .ext/include/universal-darwin22/rb_mjit_min_header-3.3.0-x86_64.h building .ext/include/universal-darwin22/rb_mjit_min_header-3.3.0-arm64.h This compiler (clang -fdeclspec -g -pipe -arch arm64 -w) looks not supported for MJIT. Giving up to generate MJIT header. This compiler (clang -fdeclspec -g -pipe -arch x86_64 -w) looks not supported for MJIT. Giving up to generate MJIT header. ``` The problem is here: * https://github.com/ruby/ruby/blob/1fdaa0666086529b3aae2d509a2e71c4247c3a12/… * https://github.com/ruby/ruby/blob/1fdaa0666086529b3aae2d509a2e71c4247c3a12/… * https://github.com/ruby/ruby/blob/1fdaa0666086529b3aae2d509a2e71c4247c3a12/… This logic runs `vm.c` through the C preprocessor and looks through the output for the `__clang__` preprocessor macro. However, `clang`'s C preprocessor only prints macro values with the `-dM` flag. We can add this flag, but it won't work with the MSVC compiler, so we need to only add it for gcc/clang. -- https://bugs.ruby-lang.org/

3 2

[ruby-core:112710] [Ruby master Bug#19481] make: *** No rule to make target 'defs/universal.mk'. Stop.
by duerst 07 Mar '23

07 Mar '23

Issue #19481 has been reported by duerst (Martin Dürst). ---------------------------------------- Bug #19481: make: *** No rule to make target 'defs/universal.mk'. Stop. https://bugs.ruby-lang.org/issues/19481 * Author: duerst (Martin Dürst) * Status: Open * Priority: Normal * ruby -v: ruby 3.1.0dev (2021-06-03T06:59:33Z master 7e14762159) [x86_64-linux] * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- When I tried to compile Ruby with `make up; make`, I got the message in the Subject. The line before said: `GNUmakefile:30: defs/universal.mk: No such file or directory` Below is the start of the output. git seems to correctly download new stuff. But apparently something is missing. I hope this problem can be fixed soon. ``` duerst@Kloentalersee:~/15ruby$ make up; make remote: Enumerating objects: 4839, done. remote: Counting objects: 100% (4839/4839), done. remote: Compressing objects: 100% (2467/2467), done. remote: Total 4839 (delta 3132), reused 2965 (delta 2049), pack-reused 0 Receiving objects: 100% (4839/4839), 3.20 MiB | 2.53 MiB/s, done. Resolving deltas: 100% (3132/3132), completed with 391 local objects. From git.ruby-lang.org:ruby cb40432c74..f68580890f master -> origin/master a4ab9921a1..0602df301c ruby_3_1 -> origin/ruby_3_1 31819e82c8..f93c7b9f58 ruby_3_2 -> origin/ruby_3_2 8f9b896b51..926b22ef5c refs/notes/commits -> refs/notes/commits Updating cb40432c74..f68580890f Fast-forward ``` -- https://bugs.ruby-lang.org/

4 3