September 2024 - ruby-core - ml.ruby-lang.org

[ruby-core:119201] [Ruby master Bug#20743] ruby doesn't properly split RUBY_DEBUG_LOG_FILTER into items
by x-yuri (Yuri Kanivetsky) 27 Jan '25

27 Jan '25

Issue #20743 has been reported by x-yuri (Yuri Kanivetsky). ---------------------------------------- Bug #20743: ruby doesn't properly split RUBY_DEBUG_LOG_FILTER into items https://bugs.ruby-lang.org/issues/20743 * Author: x-yuri (Yuri Kanivetsky) * Status: Open * ruby -v: ruby 3.4.0dev (2024-09-15T01:06:11Z master 532af89e3b) +PRISM [x86_64-linux-musl] * Backport: 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- ``` $ docker run --rm alpine:3.20.3 sh -euxc ' apk add git build-base autoconf ruby yaml-dev zlib-dev openssl-dev libffi-dev git clone https://github.com/ruby/ruby cd ruby git checkout 532af89e3b5b78dd3a6fe29c6cc64ad1b073afe2 ./autogen.sh ./configure cflags=-DUSE_RUBY_DEBUG_LOG --disable-install-doc make -j8 install ruby -v RUBY_DEBUG_LOG=stderr RUBY_DEBUG_LOG_FILTER=rb_thread_schedule_limits,rb_ractor_thread_switch ruby -e "" ' ... + RUBY_DEBUG_LOG=stderr RUBY_DEBUG_LOG_FILTER=rb_thread_schedule_limits,rb_ractor_thread_switch ruby -e RUBY_DEBUG_LOG=stderr [stderr] RUBY_DEBUG_LOG_FILTER[0]=rb_thread_schedule_limit (all) RUBY_DEBUG_LOG_FILTER[1]=rb_ractor_thread_switch (all) ... ``` As you can see `ruby` reports that `RUBY_DEBUG_LOG_FILTER[0]` equals `rb_thread_schedule_limit`, not `rb_thread_schedule_limits`. This happens because here: https://github.com/ruby/ruby/blob/532af89e3b5b78dd3a6fe29c6cc64ad1b073afe2/… `1` should not be subtracted. Also in the following lines `str` is increased, but `len` is not decreased. It makes sense to recheck if there are no further mistakes. -- https://bugs.ruby-lang.org/

3 3

[ruby-core:118879] [Ruby master Bug#20682] Slave PTY output is lost after a child process exits in macOS
by ono-max (Naoto Ono) 27 Jan '25

27 Jan '25

Issue #20682 has been reported by ono-max (Naoto Ono). ---------------------------------------- Bug #20682: Slave PTY output is lost after a child process exits in macOS https://bugs.ruby-lang.org/issues/20682 * Author: ono-max (Naoto Ono) * Status: Open * Backport: 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- According to Launchable, the following PTY tests are flaky only on macOS. https://app.launchableinc.com/organizations/ruby/workspaces/ruby/data/test-… https://app.launchableinc.com/organizations/ruby/workspaces/ruby/data/test-… https://app.launchableinc.com/organizations/ruby/workspaces/ruby/data/test-… https://app.launchableinc.com/organizations/ruby/workspaces/ruby/data/test-… It's because the slave PTY output is lost after a child process exits in macOS. Here is the code to reproduce the problem. When I remove `sleep 3` from the code, "a" is returned. ``` require 'pty' r, w, pid = PTY.spawn('ruby', '-e', 'puts "a"') sleep 3 puts r.gets #=> Returns nil ``` Based on my investigation, this issue happens in the macOS side and it's almost same as https://github.com/pexpect/pexpect/issues/662. The cause is described as follows in the ticket: > // NOTE[macOS-S_CTTYREF]: On macOS, after a forkpty(), if the pty slave (child) // is closed before the pty master (parent) reads, the pty's buffer is cleared // thus the master (parent) reads nothing. This can happen if the child exits // before the parent has a chance to call master.read(). // // This issue has been reported to Apple, but has not been resolved: // https://developer.apple.com/forums/thread/663632 // // Work around this issue by opening /dev/tty then closing it. This ultimately // causes the child's exit() to flush the slave pty's output buffer in a // blocking way. This fixes the problem on macOS 13.2 in my testing. // // Here's how the workaround works in detail: // // If we open /dev/tty, it sets the S_CTTYREF flag on the process. This flag // remains set if we close the /dev/tty file descriptor. // https://github.com/apple-oss-distributions/xnu/blob/aca3beaa3dfbd42498b42c5… // Additionally, opening /dev/tty retains a reference to the pty slave. // https://github.com/apple-oss-distributions/xnu/blob/aca3beaa3dfbd42498b42c5… // // When the child process exits: // // 1. All open file descriptors (including stdin/stdout/stderr which are the pty // slave) are closed. This does *not* drain unread pty slave output. // * If S_CTTYREF was set, closing the file descriptors does not close the // last reference to the pty slave, so no cleanup happens yet. // * NOTE[macOS-pty-close-loss]: If S_CTTYREF was not set, closing the file // descriptors drops the last reference to the pty slave. Unread data is // dropped. // // 2. If the S_CTTYREF flag is set on the child process, the controlling // terminal (pty slave) is closed. XNU's ptsclose() ultimately calls // ttywait(). // https://github.com/apple-oss-distributions/xnu/blob/aca3beaa3dfbd42498b42c5… // * ttywait() is the same as ioctl(slave, TIOCDRAIN); it blocks waiting for // output to be received. // https://github.com/apple-oss-distributions/xnu/blob/aca3beaa3dfbd42498b42c5… // * NOTE[macOS-pty-waitpid-hang]: Because of the blocking ttywait(), the // process is in an exiting (but not zombie) state. waitpid() will hang. // // * NOTE[macOS-pty-close-loss]: If the S_CTTYREF flag is not set on the // child process, ttywait() is not called, thus the pty slave does not // block waiting for the output to be received, and the output is dropped. // A well-behaving parent will use a poll() loop anyway, so this isn't a // problem. (It does make quick tests annoying to write though.) // // Demonstration of NOTE[macOS-pty-close-loss] (S_CTTYREF is not set before // exit): // // // On macOS, this program should report 'data = ""', demonstrating that // // writes are lost. // // #include <stdlib.h> // #include <errno.h> // #include <stdio.h> // #include <string.h> // #include <unistd.h> // #include <util.h> // // int main() { // int tty_fd; // pid_t pid = forkpty(&tty_fd, /*name=*/NULL, /*termp=*/NULL, // /*winp=*/NULL); // if (pid == -1) { perror("forkpty"); abort(); } // // if (pid == 0) { // // Child. // (void)write(STDOUT_FILENO, "y", 1); // exit(0); // } else { // // Parent. // // // Cause the child to write() then exit(). exit() will drop written // // data. // sleep(1); // // char buffer[10]; // ssize_t rc = read(tty_fd, buffer, sizeof(buffer)); // if (rc < 0) { perror("read"); abort(); } // fprintf(stderr, "data = \"%.*s\"\n", (int)rc, buffer); // } // // return 0; // } // // Demonstration of NOTE[macOS-pty-waitpid-hang] (S_CTTYREF is set before exit): // // // On macOS, this program should hang, demonstrating that the child // // process doesn't finish exiting. // // // // During the hang, observe that the child is in an exiting state ("E"): // // // // $ ps -e -o pid,stat | grep 20125 // // 20125 ?Es // // #include <errno.h> // #include <fcntl.h> // #include <stdio.h> // #include <stdlib.h> // #include <string.h> // #include <unistd.h> // #include <util.h> // // int main() { // int tty_fd; // pid_t pid = forkpty(&tty_fd, /*name=*/NULL, /*termp=*/NULL, // /*winp=*/NULL); // if (pid == -1) { perror("forkpty"); abort(); } // // if (pid == 0) { // // Child. // close(open("/dev/tty", O_WRONLY)); // (void)write(STDOUT_FILENO, "y", 1); // exit(0); // } else { // // Parent. // // fprintf(stderr, "child PID: %d\n", pid); // // // This will hang because, despite the child being is an exiting // // state, the child is waiting for us to read(). // pid_t rc = waitpid(pid, NULL, 0); // if (rc < 0) { perror("waitpid"); abort(); } // } // // return 0; // } In Ruby, PTY is implemented with [fork()](https://github.com/ruby/ruby/blob/master/process.c#L1706) and [posix_openpt()](https://github.com/ruby/ruby/blob/master/ext/pty/pty.c#L329) in macOS. I could reproduce the problem in the following script. ``` #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> int main() { int master_fd, slave_fd; pid_t child_pid; char *slave_name; // Open a master pseudo-terminal master_fd = posix_openpt(O_RDWR | O_NOCTTY); if (master_fd == -1) { perror("posix_openpt"); exit(1); } // Grant access to the slave pseudo-terminal if (grantpt(master_fd) == -1) { perror("grantpt"); exit(1); } // Unlock the slave pseudo-terminal if (unlockpt(master_fd) == -1) { perror("unlockpt"); exit(1); } // Get the name of the slave pseudo-terminal slave_name = ptsname(master_fd); if (slave_name == NULL) { perror("ptsname"); exit(1); } // Fork a child process child_pid = fork(); if (child_pid == -1) { perror("fork"); exit(1); } else if (child_pid == 0) { // Child process // Open the slave pseudo-terminal slave_fd = open(slave_name, O_RDWR); if (slave_fd == -1) { perror("open"); exit(1); } // Create a new session and process group if (setsid() == -1) { perror("setsid"); exit(1); } // Set the controlling terminal for the child process if (ioctl(slave_fd, TIOCSCTTY, NULL) == -1) { perror("ioctl"); exit(1); } // Duplicate the slave file descriptor to stdin, stdout, and stderr if (dup2(slave_fd, STDIN_FILENO) == -1) { perror("dup2"); exit(1); } if (dup2(slave_fd, STDOUT_FILENO) == -1) { perror("dup2"); exit(1); } if (dup2(slave_fd, STDERR_FILENO) == -1) { perror("dup2"); exit(1); } // close(open("/dev/tty", O_WRONLY)); // Close the original slave file descriptor close(slave_fd); // Execute a shell or other program (void)write(STDOUT_FILENO, "y", 1); exit(1); } else { sleep(5); char buffer[10]; ssize_t rc = read(master_fd, buffer, sizeof(buffer)); if (rc < 0) { perror("read"); abort(); } fprintf(stderr, "data = \"%.*s\"\n", (int)rc, buffer); // Clean up close(master_fd); } return 0; } ``` -- https://bugs.ruby-lang.org/

3 8

[ruby-core:115117] [Ruby master Bug#19967] Already installed libruby.dylib is used for test on macOS
by nobu (Nobuyoshi Nakada) 24 Jan '25

24 Jan '25

Issue #19967 has been reported by nobu (Nobuyoshi Nakada). ---------------------------------------- Bug #19967: Already installed libruby.dylib is used for test on macOS https://bugs.ruby-lang.org/issues/19967 * Author: nobu (Nobuyoshi Nakada) * Status: Assigned * Priority: Normal * Assignee: nobu (Nobuyoshi Nakada) * Backport: 3.0: REQUIRED, 3.1: REQUIRED, 3.2: REQUIRED ---------------------------------------- On macOS, in the case of `--enable-shared` and `--disable-load-relative`, already install libruby.dylib is used during tests if exists. This is because since [Bug #14992], `DYLD_FALLBACK_LIBRARY_PATH` is used instead of `DYLD_LIBRARY_PATH`. The latter environment variable is used preferentially, whereas the former is used as a fallback, as the name implies. -- https://bugs.ruby-lang.org/

3 2

[ruby-core:116640] [Ruby master Feature#20249] Print only backtraces in rb_bug(), by default
by osyoyu (Daisuke Aritomo) 23 Jan '25

23 Jan '25

Issue #20249 has been reported by osyoyu (Daisuke Aritomo). ---------------------------------------- Feature #20249: Print only backtraces in rb_bug(), by default https://bugs.ruby-lang.org/issues/20249 * Author: osyoyu (Daisuke Aritomo) * Status: Open * Priority: Normal ---------------------------------------- ## Background When a segfault or some unexpected situation occurs, `rb_bug()` is called and prints some few hundred to thousands of lines. The most helpful parts are (arguably) "Ruby level backtrace information" and "C-level backtrace information", but those parts are buried in the very lengthy report. In particular, the "Other runtime information" which contains the list of loaded features (scripts?) and the process memory map could be extremely long despite it does not come very useful, at least when developing C extensions. Even a minimal report from a simple script would consist of 250 lines and require 7 PgUps on my MacBook Air (13 inch) to reach the backtrace part, which contains all the information I need. ## Proposal My proposal is to default to a "minimal report" mode with a limited set of sections, perhaps only "Ruby level backtrace information" and "C level backtrace information" only When a full report is desired (i.e. for bug reports), the user could re-run the script with an special environment variable, such as `RUBY_FULL_CRASH_REPORT=1`. Rust implmements a similar pattern. It doesn't print the full backtrace on panics by default; instead, it guides the user to re-run the program with `RUST_BACKTRACE=1`. It might be hard to reproduce some crashes and segfaults, especially in long-running daemons. It might be nice to default to the "full" mode when stdout is not a tty, since daemons tend to run in non-tty environments. ## Appendix A typical crash report would look like this: ``` ../../example.rb: [BUG] ruby 3.4.0dev (2024-01-20T15:27:19Z master 366b14c0cd) [arm64-darwin23] -- Crash Report log information -------------------------------------------- (5 lines) -- Control frame information ----------------------------------------------- (~50 lines) -- Ruby level backtrace information ---------------------------------------- (depends on program; typically ~50 lines in Rails) -- C level backtrace information ------------------------------------------- (50+-ish lines, depends on program) -- Machine register context ------------------------------------------------ (~10 lines) -- Threading information --------------------------------------------------- (2 lines) -- Other runtime information ----------------------------------------------- * Loaded script (1 line) * Loaded features (depends on program; 800+ lines in Rails) * Process memory map (depends on environment; around 200 lines?) -- https://bugs.ruby-lang.org/

5 10

[ruby-core:111121] [Ruby master Bug#19165] Method (with no param) delegation with *, **, and ... is slow
by matsuda (Akira Matsuda) 16 Jan '25

16 Jan '25

Issue #19165 has been reported by matsuda (Akira Matsuda). ---------------------------------------- Bug #19165: Method (with no param) delegation with *, **, and ... is slow https://bugs.ruby-lang.org/issues/19165 * Author: matsuda (Akira Matsuda) * Status: Open * Priority: Normal * ruby -v: ruby 3.2.0dev (2022-12-01T08:05:41Z master 4e68b59431) +YJIT [arm64-darwin21] * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN ---------------------------------------- I found that method delegation via Forwardable is much slower than normal method call when delegating a method that does not take parameters. Here's a benchmark that explains what I mean. ``` require 'forwardable' require 'pp' require 'benchmark/ips' class Obj extend Forwardable attr_accessor :other def initialize @other = Other.new end def foo_without_splat @other.foo end def foo_with_splat(*) @other.foo(*) end def foo_with_splat_with_name(*args) @other.foo(*args) end def foo_with_splat_and_double_splat(*, **) @other.foo(*, **) end def foo_with_triple_dots(...) @other.foo(...) end delegate :foo => :@other end class Other def foo() end end o = Obj.new Benchmark.ips do |x| x.report 'simple call' do o.other.foo end x.report 'delegate without splat' do o.foo_without_splat end x.report 'delegate with splat' do o.foo_with_splat end x.report 'delegate with splat with name' do o.foo_with_splat_with_name end x.report 'delegate with splat and double splat' do o.foo_with_splat_and_double_splat end x.report 'delegate with triple dots' do o.foo_with_triple_dots end x.report 'delegate via forwardable' do o.foo end end (result) simple call 38.918M (± 0.9%) i/s - 194.884M delegate without splat 31.933M (± 1.6%) i/s - 159.611M delegate with splat 10.269M (± 1.6%) i/s - 51.631M delegate with splat with name 9.888M (± 1.0%) i/s - 49.588M delegate with splat and double splat 4.117M (± 0.9%) i/s - 20.696M delegate with triple dots 4.169M (± 0.9%) i/s - 20.857M delegate via forwardable 9.204M (± 2.1%) i/s - 46.295M ``` It shows that Method delegation with a splat is 3-4 times slower (regardless of whether the parameter is named or not), and delegation with a triple-dot literal is 9-10 times slower than a method delegation without an argument. This may be because calling a method taking a splat always assigns an Array object even when no actual argument was given, and calling a method taking triple-dots assigns five Array objects and two Hash objects (this is equivalent to `*, **`). Are there any chance reducing these object assignments and making them faster? My concern is that the Rails framework heavily uses this kind of method delegations, and presumably it causes unignorable performance overhead. -- https://bugs.ruby-lang.org/

6 8

[ruby-core:112005] [Ruby master Bug#19374] Issue with Ractor.make_shareable with curried procs
by luke-gru (Luke Gruber) 13 Jan '25

13 Jan '25

Issue #19374 has been reported by luke-gru (Luke Gruber). ---------------------------------------- Bug #19374: Issue with Ractor.make_shareable with curried procs https://bugs.ruby-lang.org/issues/19374 * Author: luke-gru (Luke Gruber) * Status: Open * Priority: Normal * Backport: 2.7: UNKNOWN, 3.0: UNKNOWN, 3.1: UNKNOWN, 3.2: UNKNOWN ---------------------------------------- This works, but shouldn't: ```ruby class Worker def start(&blk) blk = blk.curry # bug in ruby allows sharing of non-shareable proc Ractor.make_shareable(blk) @ractor = Ractor.new(blk) do |b| main = b.call p "from ractor: #{main}" end end def work @ractor.take end end worker = Worker.new a = self # unshareable main object p "from main: #{a}" worker.start { a } worker.work ``` The curried proc has a reference to the original proc and it's not checked for shareability. -- https://bugs.ruby-lang.org/

3 4

[ruby-core:118284] [Ruby master Misc#20575] Syntax Moratorium til 3.4
by matz (Yukihiro Matsumoto) 13 Jan '25

13 Jan '25

Issue #20575 has been reported by matz (Yukihiro Matsumoto). ---------------------------------------- Misc #20575: Syntax Moratorium til 3.4 https://bugs.ruby-lang.org/issues/20575 * Author: matz (Yukihiro Matsumoto) * Status: Open ---------------------------------------- Hi, As some may remember from the closing keynote at RubyKaigi, we are introducing Syntax Moratorium to support fair development of parsers. During the Syntax Moratorium period, new syntactical changes will be suspended (changes not includes bug fixes, of course). The moratorium period is scheduled to end with the release of 3.4, since the respective parser developers told us they did not need a very long period of time. Matz. -- https://bugs.ruby-lang.org/

3 2

[ruby-core:119272] [Ruby master Feature#20757] Make rb_tracearg_(parameters|eval_script|instruction_sequence) public C-API
by richardboehme 11 Jan '25

11 Jan '25

Issue #20757 has been reported by richardboehme (Richard Böhme). ---------------------------------------- Feature #20757: Make rb_tracearg_(parameters|eval_script|instruction_sequence) public C-API https://bugs.ruby-lang.org/issues/20757 * Author: richardboehme (Richard Böhme) * Status: Open ---------------------------------------- **Abstract** As a C-extension developer when using tracepoints I include "ruby/debug.h". This includes most of TracePoint's API but it seems like the C-equivalents for TracePoint#parameters, TracePoint#eval_script and TracePoint#instruction_sequence are missing/not being exported in the header. **Background** Most APIs like rb_tracearg_return_value are exported in "ruby/debug.h". If I understand correctly, the implementations for those methods are located in "ruby/vm_trace.c". The following methods implemented in "ruby/vm_trace.c" are missing in "ruby/debug.h": * rb_tracearg_parameters * rb_tracearg_eval_script * rb_tracearg_instruction_sequence **Proposal** I propose to add those methods to "ruby/debug.h". From my limiting understanding the change should be simple and not break backward compatibility, because we'd only need to add those function declarations to "ruby/debug.h". I'd be open to contribute this change if it was approved. **Use cases** I'm implementing a method call tracer for Ruby using the C-extension API. I wanted to get information about the parameters that the called method receives. When writing in Ruby this can be done using the TracePoint#parameters method, but I could not find the equivalent C-API. A workaround is to retrieve the method object (using the method_id) and check the method parameters. **See also** * Implementation of TracePoint#parameters in #14694 * Implementation of TracePoint#eval_script and TracePoint#instruction_sequence in #15287 -- https://bugs.ruby-lang.org/

3 4

[ruby-core:117826] [Ruby master Bug#20480] Complie failure for unable to configure NET_LUID using msys2 mingw64-gcc
by nekoyama32767 (Jinsong Yu) 09 Jan '25

09 Jan '25

Issue #20480 has been reported by nekoyama32767 (Jinsong Yu). ---------------------------------------- Bug #20480: Complie failure for unable to configure NET_LUID using msys2 mingw64-gcc https://bugs.ruby-lang.org/issues/20480 * Author: nekoyama32767 (Jinsong Yu) * Status: Open * ruby -v: ruby 3.4.0dev (2024-05-10T04:54:31Z master 2f915e729a) [x64-mingw32] * Backport: 3.1: UNKNOWN, 3.2: UNKNOWN, 3.3: UNKNOWN ---------------------------------------- Master commit:`2f915e729ac8c66f4009f4b28a57773923d7e7d1` NET_LUID is not successfully checked in win32 configure. When try to compile in msys2 mingw64-gcc there will be a error message like follow. ``` win32/win32.c:4365:7: error: conflicting types for 'NET_LUID'; have 'struct <anonymous>' 4365 | } NET_LUID; | ^~~~~~~~ In file included from D:/msys64/mingw64/include/iptypes.h:17, from D:/msys64/mingw64/include/iphlpapi.h:17, from ./include/ruby/win32.h:40, from ./include/ruby/internal/dosish.h:38, from ./include/ruby/defines.h:78, from ./include/ruby/ruby.h:25, from win32/win32.c:24: D:/msys64/mingw64/include/ifdef.h:106:3: note: previous declaration of 'NET_LUID' with type 'NET_LUID' 106 | } NET_LUID, *PNET_LUID; | ^~~~~~~~ ``` Mingw64-gcc has NET_LUID, when comment out line 4357-line 4367 in `win32/win32.c` in follow, compile will be successed. ``` #ifndef HAVE_TYPE_NET_LUID typedef struct { uint64_t Value; struct { uint64_t Reserved :24; uint64_t NetLuidIndex :24; uint64_t IfType :16; } Info; } NET_LUID; #endif ``` mingw64-gcc version ``` gcc --version gcc.exe (Rev4, Built by MSYS2 project) 13.2.0 Copyright (C) 2023 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ``` -- https://bugs.ruby-lang.org/

2 3

[ruby-core:117929] [Ruby master Feature#20498] Negated method calls
by MaxLap (Maxime Lapointe) 05 Jan '25

05 Jan '25

Issue #20498 has been reported by MaxLap (Maxime Lapointe). ---------------------------------------- Feature #20498: Negated method calls https://bugs.ruby-lang.org/issues/20498 * Author: MaxLap (Maxime Lapointe) * Status: Open ---------------------------------------- I want to propose the following syntax: `foo.!bar`. I know it's already valid syntax, but please read on for details. When someone write a somewhat long line of code that is negated, the main way I've seen of doing it is: ``` must_create_user = !User.where(somelong: :condition, even_more: "thing").exists? ``` I personally highly dislike it, as I must keep the "not" in the back of my mind as I read the line. When quickly reading a line like this, it's super easy to misread and understand the opposite result. The current ways around this I can think of are: * rename the variable (can be annoying) * Use `unless` (only possible when in a condition; some people, like me, have a hard time grapsping a `unless`) * use a `.!`in the end (`foo.exists?.!`), I've never seen that and it looks ugly to me (this is subjective). * create a new method name with the negated meaning (not always possible) My proposal would look like this: ``` must_create_user = User.where(somelong: :condition, even_more: "thing").!exists? ``` You cannot forget the bang that you saw 15 words ago, it's right there. It also basically reads as English: "user where ... doesn't exists". The main argument against this I can think of is that it's technically already a valid syntax. I believe it's frowned upon to override the bang operator and I'm not aware of places where it is overridden to with also having a parameter. I made a prototype in RubyNext, which you can try here: https://ruby-next.github.io/#gist:0e133bf6f27f2437193dc034d58083dc -- https://bugs.ruby-lang.org/

8 9